User guide

Targus USB Bluetooth

2.0 Adapter with EDR

Verifying the Adapter is Installed

After installing the adapter software (for 2000/XP):

1 Click Start/Settings/Control Panel/System/Hardware/ Device

Manager.

If the information is not present:

1 Unplug the adapter

2 Plug the adapter into the USB port to initiate the driver. Verify that

the adapter is installed.

You are now ready to configure the Bluetooth.

YOU CAN ALSO DOWNLOAD THE LATEST DRIVER FROM:

http://www.broadcom.com/products/bluetooth_update.php

2 Check under 'Bluetooth Devices' that a 'Broadcom 2045

Bluetooth 2.0 USB-UHE device / USB device” is installed.

After installing the adapter software (for Vista):

1 Click Start/Control Panel/Hardware/Device Manager.

2 Check under 'Bluetooth Radios' that a 'Broadcom 2045 Bluetooth

2.0 USB-UHE device / USB device” is installed.

For Windows Vista

1 Insert the driver software CD into your computer’s CDROM drive.

3 The installation screen will appear and choose Window’s version

(Windows Vista) on the setup screen. Click Next.

5 Follow the on-screen instructions.

NOTE: FOR WINDOWS VISTA USERS, A "USER ACCOUNT CONTROL" WINDOW

APPEARS, PLEASE CLICK THE "ALLOW" BUTTON.

2 If setup does not begin automatically, click Start, Run, then enter

D:\setup.exe (where D: is the path of your disc drive) and then click

OK.

6 Click Next.

4 The "No Bluetooth device was detected" window appears.

Insert the USB Bluetooth adapter in the USB port.

7 Click Finish.