Operation Manual

Troubleshooting

pops up should contain a first entry Succeeded for a modem that is working

properly.

• Try a different modem cable.

• Make sure that the modem cable has been properly inserted into the modem

port.

• Try a different telephone wall socket (easy when using a notebook).

• Try connecting to a different ISP to get Internet access.

• Establish a test connection to a normal telephone number (e.g. your mobile

phone) by clicking Start/All Programs/Accessories/Communications/

HyperTerminal.

No Picture Is Shown on a TV Connected To My PC

• You need to restart your PC in order to detect the TV as an additional display

device.

If you output the monitor picture via the TV out port to the television set and the TV

shows a blank screen, please proceed as follows:

• Make sure that you have connected the TV set properly, that it is turned on and

that you have tuned the right channel before switching on your computer.

• Enable the TV Out port via the software. This procedure is explained on page 7.

If the picture shown on the TV set is black and white only, this may be due to the TV

set.

• Make sure that your TV supports S-Video signals: please read the documenta-

tion of your TV or contact the manufacturer or dealer.

• When using an S-Video cable, replace it with a conventional Composite cable

(Euro Cinch connector).

• Use the correct S-Video-to-Composite adapter instead of the normal adapter

plug.

• Test your computer together with a different TV set where you are sure that it

supports S-Video, e.g. in a shop.