Operation Manual

14
Advanced Configuration and Handling
If your modem is connected to a PBX, type the prefix for accessing the outside line
into the corresponding field. Normally, this will be a zero (0). But this is not neces-
sary for private telephone lines without any PBX!
Finally, specify the dialing system.
Most of the countries use Tone dial-
ing, that sends small beep tones
when dialing. Alternatively, you can
use pulse dialing where pulse tickers
can be heard. If you are not sure
about the dialing system for your
telephone line, please contact your
telephone provider prior to using the
modem. Click OK to finish this step.
Windows will finally prompt you if you
wish to establish a new connection
from this location. Click OK again to
confirm your selection.
3. The first window of the New Connection Wizard contains information that you
can skip by clicking Next. The next window prompts you for the connection type.
Select the first option Connect to the Internet and click Next to continue.