Operation Manual

Quick Start in Five Minutes

2. At the end, these settings will be saved automatically and will be available in the

future. Therefore you will only have to perform this process once during the first-

time startup.

3. Once the first-time setup is completed, you must restart your computer. Most of

the drives and components are still in a kind of "sleeping condition". After restarting,

all hardware components will be enabled and Windows will re-load its configuration.

4. To do so, click Start/Turn Off Computer in the lower left-hand corner. A new

window appears offering three options. Click Restart. Windows will shut down and

restart after a few seconds. Next, the Windows Desktop will load and you can start

using your computer.

Optimizing the Screen Display

After you have launched and setup Windows for the first time, the display will

use standard settings. The picture display might not be optimum and the

graphics adapter does not work at highest quality. This is not a malfunction and

you may fix it by changing the configuration. If the above is your case, please

read on page 7 how to optimize the display quality.