Operation Manual

Starting Windows for the First Time
5
3. Connect the cable (VGA monitor cable) to the corresponding port of your com-
puter. When using a modern flat-panel computer display featuring a DVI port, you
can connect it to this port. This will provide a better signal quality. Do not force the
mechanical parts and only tighten the screws manually.
4. Connect the monitor to the electrical wall outlet and switch it on.
Connecting Mouse and Keyboard
1. First of all, the batteries or rechargeable batteries
must be inserted into the keyboard and mouse. Open
the compartment on the underside of the mouse and
insert the batteries. Observe the labeling for the cor-
rect polarity.
2. Next open the battery compartment on the under-
side of the keyboard and insert the batteries in
accordance with the marks.
3. Connect the wireless receiver to a USB port on
the PC. You can use any USB port for this – e.g. one
on the back of the device.
4. The devices now have to be synchronized. Turn
on your computer. Press the configuration button on the wireless receiver so that
this searches for new devices. Now you need to press the ID button on the under-
side of the keyboard and then on the underside of the mouse within the next 15
seconds.
Note: The USB cable of the mouse is for charging the rechargeable batteries of the
mouse!
1.3 Starting Windows for the First Time
First of all you have to power on the device by toggling the main power switch.
Windows will automatically be loaded and you will see the Desktop. Here you can
start your work immediately. However, when using your computer for the first time,
the boot process will be different. Before using the computer for the first time,
Windows has to be configured and customized for your working habits.
1. This process is very simple and can be completed within a few minutes. A setup
wizard will appear automatically, guiding you through the different steps of the first-
time setup. Follow the on-screen instructions to complete all the steps.