Operation Manual

4
Quick Start in Five Minutes
1 Power receptacle
2 Power switch
3 Security seal
4 Product designation and serial number
5 Scart (Euro AV) socket
6 PS/2 connectors
7 SPDIF digital output/input (Coaxial)
8 Parallel interface
9 eSATA interface
10 SPDIF digital output/input (optical)
11 USB port (4x)
12 FireWire port (6-pin)
13 Network / LAN / Ethernet connector
14 Center / Subwoofer connector
15 Side loud speakers connector
16 Back loud speakers connector
17 Microphone connector
18 Audio- Line out/front loud speakers
connector (stereo loudspeaker connector)
19 Audio-Line in
20 Housing lock
21 DVI/-I digital monitor connector
22 VGA analog monitor connector
23 S-Video out
24 Serial interface
25 TV signal input – DVB-S
26 TV signal input – digital, analog, DVB-T
27 Broadcasting antenna input
28 RJ11 modem connector
1.2 Connecting and Powering Up
Connecting Power and Monitor
1.
Connect the PC to the wall outlet by inserting the
supplied power cable into the corresponding power
inlet.
2.
Toggle the main power switch on the back of your
computer so that the label "I" is pressed. From now
on, you can leave the main power switch turned on
all the time and switch the computer on and off by
using the power switch located at the front of the PC.