Operation Manual

5
-
3
Notebook
Troubleshooting
If your notebook hangs while running or booting this can be due to a recently
installed software. This can be solved as follows:
- Power your notebook on. First of all you'll see the usual BIOS messages. As
soon as they have finished, press the [F8] key. This will display the Windows
Vista boot menu. Select the Safe Mode command. Windows will now boot in
a special "emergency mode".
- Click Start/All Programs/Accessories/System Tools/System Restore to
restore it to an earlier time when it worked. If this does not succeed, please
also try all the other restore options.
- Uninstall the recently installed software via the Add or Remove Programs
option from the Control Panel (this also works in Safe Mode).
- Start your notebook with the Windows Vista Home Premium Edition CD
inserted into the drive and hold any letter key (e.g. . [H]) until the Windows
Setup is launched. Wait until all files have been loaded. In the Windows
Welcome screen, press [Enter], confirm the End User License Agreement by
pressing [F8] and press [R] to repair an installation. (You only need to reinstall
the drivers from the supplied EasyInstall CD once Windows has been
repaired.)
- Contact the manufacturer of the third-party software.