GV300TP User manual GV300TP User Manual GSM/GPRS/GPS Tracker QSZTGV300TPUM001 Revision: R1.
GV300TP User Manual Document Title GV300TP User Manual Version R1.01 Date 2019-08-18 Status Release Document Control ID QSZTGV300TPUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GV300TP User Manual Contents Contents ............................................................................................................................................ 3 0. Revision History ............................................................................................................................. 4 1. Introduction .................................................................................................................................. 5 1.1 Reference...................
GV300TP User Manual 0.Revision History Revision Date Author Description of change 1.00 2017-08-10 Eddy Qi Initial 1.
GV300TP User Manual 1.Introduction The GV300TP is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports quad band GSM frequencies GSM850/GSM900/DCS/PCS. Its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. It has Bluetooth. The GV300TP has multiple input/output interfaces that can be used for monitoring or controlling external devices.
GV300TP User Manual RXD Receive Data TXD Transmit Data SPKN Speaker Negative SPKP Speaker Positive 2.Product Overview 2.1.Product Appearance Figure 1.Appearance of GV300TP 2.2.Parts List Table 4.Parts List Name GV300TP Locator Picture 122*85.2*24.
GV300TP User Manual 2.3.Interface Definition The GV300TP has two connectors which include a 16 PIN interface connector and a 14pin interface connector. The 16 Pin interface connector contains the connections for power, I/O, RS232, microphone, speaker, etc and the 14Pin interface connector contains High speed CAN, Low speed CAN, K-LINE, L-LINE . The sequence and definition of these two connectors are shown in the following figure: Figure 2.The 16 PIN Connector on the GV300TP Table 5.
GV300TP User Manual 12 AD2/IN2 Analog Input 2/ Negative Triggered 2 13 AD1/IN1 Analog Input 1/ Negative Triggered 1 14 OUT1 Negative Output 1 15 OUT4/IN3 Voltage output 4(12V) / Negative Output4/ Negative Triggered 3 16 1-Wire 1-wire Bus Table 6.
GV300TP User Manual 2.4.GV300TP User Cable Color Table 7.
GV300TP User Manual 3.Get Started 3.1.Open the Case Figure 3.Open the Case 3.2.Install a SIM Card Open the case and ensure the unit is not powered (unplug the 16Pin cable and switch the internal battery to the OFF position). Slide the holder right to open the SIM card holder. Insert the SIM card into the slot as shown below with the yellow colour contact area facing down. Take care to align the cut mark. Close the SIM card holder. Close the case. Figure 4.
GV300TP User Manual 3.3.Install the Internal Backup Battery GV300TP has an internal backup Li-ion battery, put the battery line on the right of plastic clip which can avoid the battery line to be damaged when install the screw of PCBA. Figure 5.Backup Battery Installation 3.4.Switch on the Backup Battery To use the GV300TP backup battery, the switch must be in the ON position. The switch on the case and the ON/OFF position are shown below. Figure 6.Switch and ON/OFF Position Note: 1.
GV300TP User Manual 3.5.Install the External GPS Antenna The GPS antenna is bought by the users themselves from a third party. GV300TP will automatically detect and use an external antenna when connected. We recommend the users to use an external antenna with following specifications: GPS antenna Specification Frequency 1575.42 MHz Bandwidth >5 MHz Beam width >120 deg Supply voltage 2.7V-3.
GV300TP User Manual Figure 7.Typical Power Connection 3.7.Ignition Detection Table 8.Electrical Characteristics of Ignition Detection Logical status Electrical characteristics Active 5.0V to 32V Inactive 0V to 3V or open Figure 8.Typical Ignition Detection IGN (PIN3) is used for ignition detection. It is strongly recommended to connect this pin to ignition key “RUN” position as shown above.
GV300TP User Manual Table 9.Electrical Characteristics of the Digital Inputs Logical status Electrical characteristics Active 0V to 0.8V Inactive Open The following diagram shows the recommended connection of a digital input. Figure 9.Typical Digital Input Connection 3.9.Analog Inputs There are two analog inputs on GV300TP, and the analog input voltage range is from 0 to 32V. The following diagram shows the recommended connection. Figure 10.
GV300TP User Manual 3.10.Digital Outputs There are four digital outputs on GV300TP for negative outputs (PIN7, PIN8, PIN14 and PIN15), also three of them(PIN7, PIN8 and PIN15) can be configurable as positive outputs. As negative outputs, all are open drain type and the maximum drain current is 150 mA; As positive outputs, OUT3 (PIN7) outputs 5V powered for One-wire bus, and two others (PIN8, PIN15) can output voltage 12V@200mA for 12V system or 24V@200mA for 24V system.
GV300TP User Manual Figure 13. Typical Connection with LED (Positive Output) Note: 1. OUT1 will latch the output state during reset. 2. Many modern relays come with a flyback diode pre-installed internal to the relay itself. If the relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it should be added externally. A common diode such as a 1N4004 will work in most circumstances. 3.11.Device Status LED Figure 14.
GV300TP User Manual Table 11.Definition of Device Status and LED LED Device status LED status GSM (Note 1) Device is searching GSM network. Fast flashing (Note 3) Device has registered to GSM network. Slow flashing (Note 4) SIM card needs pin code to unlock. ON GPS chip is powered off. OFF GPS sends no data or data format error occurs. Slow flashing GPS chip is searching GPS info. Fast flashing GPS chip has gotten GPS info.
GV300TP User Manual 3.12.Serial Port/UART Interface There are two lines dedicated to the Serial Port/UART interface (TXD and RXD). TXD/RXD is standard RS232 signal. Figure 15.Typical Connection with RS232 Port 3.13.Reset Button Figure 16. Reset Button Use a thin pin to insert the hole and press the reset button if the device working in abnormal.
GV300TP User Manual 4.FCC Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.
