Technical Specifications
LeakBarrier
®
EasyStick Plus
™
Self-Adhering Roofing System
General Precautions
Install EasyStick Plus only when material interface
temperatures (air, deck, material) are 40°F and rising.
Do not install when any form of moisture such as water,
ice, snow, dew, rain, etc. is present.
Ensure roof has proper slope and drainage prior to
Features and Benefits
Time-tested “Dual Compound” based SBS peel and stick
membrane.
No specific tools required. Clean, easy to handle, peel
and stick self-adhering application.
No fumes during application, eliminating odors caused
by adhesives and hot asphalt.
30-40% quicker installation than conventional
application.
Excellent granule adhesion.
Polyester reinforcement offers superior tensile, tear
and elongation properties and ensures exceptional
dimensional stability.
Well defined four inch peel and stick side lap.
LeakBarrier EasyStick Plus Self-adhering Roofing Systems are cost-
effective and utilize easy-to-apply general purpose roofing sheets designed for
use in new roofing and re-roofing. They are ideally suited for residential low-slope
applications such as porches and carports or as flashing materials.
LeakBarrier
®
EasyStick Plus
™
Self-Adhering Roofing System
Usage
Available Colors
Black, White, Cedar Blend, Dark Brown, Red, Weatherwood, Hickory, Slate Grey and Green.
LeakBarrier EasyStick Plus is a premium, SBS modified, granule surfaced,
polyester reinforced, self-adhesive modified bituminous cap sheet membrane for
use in most low slope and steep slope roof system applications. EasyStick Plus is a
perfect alternative to the application of roofing using conventional application
methods of torching, hot asphalt mopping, or using cold applied adhesives.
LeakBarrier EasyBase
™
is a SBS modified, glass fiber reinforced, self-
adhesive modified bituminous base sheet for use in most low slope and
steep slope roof system applications. EasyBase has an ultraviolet resistant
polyolefinic film surface and is specifically designed for use with EasyStick Plus
cap sheets.
SCAN to view
application video
Peel and stick selvage results in instant, watertight lap
bond (5X of competitor products).
Adheres to a variety of substrates.
Meets and/or exceeds the applicable sections of ASTM D
6164 and ASTM D 1970 specifications.
Miami Dade County Approval NOA No. 12-0703.05 and
12-0703.06
Florida Building Code approved FL 9487-R5
Texas Department of Insurance Approval RC-152
UL Classified (R 13228) for use in Class A and B roofs
(EasyStick Plus FR version).
10, 15, 20 and 25 Year Limited Warranties.
Storage
EasyStick Plus rolls must be stored indoors, in a dry location.
Boxes must be stored on end only. Do not store in a
leaning position.
The rolls must be protected from the elements. Do not
expose rolls to direct sunlight.
Store rolls at room temperatures. Prolonged exposure
to elevated temperatures may reduce the adhesive
characteristics of the membrane.
installation. The roof must meet Tarco’s minimum slope
requirements.
Proper ventilation is critical. When applying over the
entire roof deck, the roofing system must provide