Technical Specifications

LeakBarrier
®
ReflectPlus
LeakBarrier
®
ReflectPlus
General Precautions
 Install ReflectPlus in strict compliance with applicable
building codes.
 Follow Occupational Safety and Health Administration
(OSHA) safety standards; use common sense measures
and adequate precautions to prevent accidents.
 Install ReflectPlus only when material interface
temperatures (air, deck, material) are 40°F and rising.
 Do not install when any form of moisture such as water,
frost, ice, snow, dew, rain, etc. is present.
 Ensure roof has positive drainage prior to installation.
Features and Benefits
 Easy-to-install sheet – no need for torches, tapes or
fasteners
 Light weight and easy to handle
 Highly reflective surface that is UV resistant and helps
lower utility costs
 Rubberized asphalt imparts water barrier characteristic
 Self-sealing around fasteners
 Specially formulated SBS compound facilitates a pliable
sheet that will not crack or dry
LeakBarrier ReflectPlus is designed for use as a finished roof covering
in multi-ply roof systems, including new roofing, re-roofing and recover
applications. ReflectPlus is ideal for patching and gutter repair, and for use as a
flashing membrane.
Usage
Storage
 ReflectPlus must be stored indoors, in a dry location.
 Rolls must be protected from the elements.Do not store
rolls in direct sunlight.
 Keep rolls clean and free from moisture prior to
installation.
LeakBarrier ReflectPlus is a premium self-adhering SBS modified bituminous
membrane with a highly reflective film laminate on the upper side and a removable
silicone treated release liner on the bottom adhesive side.The exposed surface is
comprised of a proprietary construction of a bright white acrylic coated aluminum
reinforced with a polyolefinic film that provides enhanced reflectivity and emissivity.
 High temperature resistant up to 240
0
F
 Release film peels off for easy installation and handling
 Versatile sheet adheres to a wide variety of substrates
such as concrete, plywood, OSB, metal, wood vinyl,
masonry, certain rigid insulations, insulated concrete
forms (ICF), etc.
 Durable surface that can be re-surfaced
 Meets ASTM D1970
 Store rolls at room temperature.Prolonged exposure
to elevated temperatures may reduce the adhesive
characteristic of the material.
 Do not double stack pallets.
 Proper ventilation is critical. When applying over the
entire roof deck, the roofing system must provide
sufficient ventilation, including both ridge and soffit
venting.
 A full, irreversible adhesion is achieved when the
underlayment goes through a complete heat cycle. Do
not attempt to remove the underlayment immediately
after adhesion to the substrate.
 Use of a hand-held “hot air gun” might help in enhancing
adhesion during application of underlayment in cooler
weather.
Surface Preparation
 Surface must be clean, dry, and free of voids prior to
installing ReflectPlus.
 For re-roofing, all old roofing and other loose materials
must be removed prior to installation.
 ReflectPlus may be installed directly to the substrates of
non-occupied spaces such as carports, sheds, canopies,
porches, etc.