SDS

Safety Data Sheet LeakBarrier MS300 Page 2 of 8
HAZARD RATING (NFPA) HAZARD RATING (HMIS®)
NFPA National Fire Protection Association
HMIS® is a registered trademark of the American Coatings Association
Degree of Hazard
0 - Minimal (Insignificant)
1 - Slight
2 - Moderate
3 - Serious (High)
4 - Severe (Extreme)
SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NAME
COMMON NAME
CAS NUMBER
PERCENT BY WEIGHT
Asphalt
Asphalt Flux
8052-42-4
8-30
Oxidized Asphalt
Coating Asphalt
64742-93-4
13-52
Styrene-Butadiene-Styrene
SBS Rubber
9003-55-8
1-7
Petroleum Hydrocarbon Resin
Resin
68527-25-3
0.1-2
Mineral Oil
Oil
64741-96-4
0.1-2
Calcium Carbonate
Limestone
1317-65-3
9-40
Continuous Filament Glass Fiber
Glass Mat
65997-17-3
3-8
Coal Slag Fines
Slag
68476-96-0
8-30
Polyethylene
Poly Film
9002-88-4
1-3
Polypropylene
Poly Film
9003-07-0
1-3
Note:
NA = Not Available
NE = Not Established
SECTION 4 FIRST AID MEASURES
INHALATION
If product is heated, exposure to fumes, vapors, or mists may cause irritation of the nose and
throat. Drink water to clear throat or blow nose to clear. Use of product in properly ventilated
areas is not expected to cause adverse effects. Remove to fresh, uncontaminated air. Give
artificial respiration and/or oxygen by trained personnel, if necessary and get immediate
medical attention.
SKIN
Remove contaminated clothing and wash exposed skin with soap and water. If irritation
develops or persists, seek medical attention. If contacted by hot asphalt, cool with ice or water;
HEALTH
1
FLAMMABILITY
1
REACTIVITY
0
SPECIAL NOTICE
-
HEALTH
FLAMMABILITY
PHYSICAL HAZARD
PERSONAL PROTECTION