User Guide

Doorbell Appearance Light Indications
Hub Status LED
Starting up
Connected to the cloud
Connected to router
Hub resetting
Hub updating
Ready for setup
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Blinking red and green
Blinking green slowly Pairing
Doorbell Status LED
Doorbell updating
Doorbell resetting
Ready for pairing
Pairing
Connected to the cloud
Blinking red and green
Solid red
Blinking red once a minute
Blinking green quickly
Blinking red quickly
Blinking red slowly
Blinking green slowly
Solid green
Solid amber Connected to the hub
Starting up
Low battery
Oine
• Do not use damaged charger or USB cable to charge the
device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not
allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by
manufacturer and in the original packing of this product. If
you have any questions, please don't hesitate to contact
us.
• Keep the device away from re or hot environments. DO
NOT immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such
as re alarms. Radio waves emitted from this product
may cause such devices to malfunction resulting in an
accident.
• Observe restrictions on using wireless products in fuel
depots, chemical plants or when blasting operations are
in progress.
• Do not use liquid to clean the product. Only use a dry
cloth.
• Never put metal objects inside the product. If a metal
object enters the product turn o the circuit breaker and
contact an authorised electrician.
• This product is not intended to be used when providing
medical care. Consult the manufacturer of any personal
medical devices, such as pacemakers or hearing aids to
determine if they are adequality shielded from external RF
(radio frequency) energy.
• Do not use this product in health care facilities. Hospitals
or health care facilities may be using equipment that
could be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time
unplug the product from the power outlet.
• This product may interfere with other electronic products
such as TV, radios, personal computers, phones or other
wireless devices.
• Always follow the local waste and recycle laws when you
get rid of the used battery.
• Do not use the product if the casing has been broken.
Danger of electric shock.
• Never touch the product with wet hands.
• The mounting height should not be higher than 2 meters.
Please read and follow the above safety information when
operating the device. We cannot guarantee that no
accidents or damage will occur due to improper use of the
device. Please use this product with care and operate at
your own risk.
CAUTION!
Risk of re or explosion
if the battery is replaced by an incorrect type
Safety Information
TP-Link hereby declares that the device is in compliance
with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC,
2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce/
TP-Link hereby declares that the device is in compliance
with the essential requirements and other relevant
provisions of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
1
1
2
3
4
Hub Appearance
▲
microSD card not included.
SYNC Button
Press to pair with the doorbell, or silence the hub when it rings.
RESET
Use a pin to press and hold for about 5 seconds until the
hub LED quickly blinks red to reset the hub.
microSD Card Slot
Insert a microSD card
▲
to record doorbell videos locally.
Initialize the microSD card within the Tapo app rst.
Status LED
Indicates the status of your hub.
Indicates the status of your doorbell.
BackFront
3
Spotlight
7
Light Sensor
8
Speaker
4
Ring Button
6
Status LED
2
Motion Sensor
Lens
5
Microphone
SYNC/RESET Button
9
• Press for 1s: Pair with the hub
• Press and hold for about 5s: Reset the doorbell
• Press and hold for 5s: Pause the alarm (Continues to
alarm when released)
• Press and hold buttons simultaneously for 10s:
Disable the anti-theft alarm feature
6
4
2
7
8
1
5
9
10
Anti-Theft Button
10
3
microSD
1 2 3
4
When the Anti-Theft Alarm is enabled on the Tapo app, an
alarm will trigger once the doorbell is removed.
How to Remove Battery
Use a pin to detach the doorbell and rmly
pull out the battery.
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/