User Guide

*Images may dier from your actual product.
©2022 TP-Link 7106509991 REV1.1.0
03 /
Set Up the Hub
and Doorbell
1. Get the Tapo app from the App Store or
Google Play.
2. Follow the instructions in the Tapo app to
set up your hub.
3. Follow the instructions in the Tapo app to
set up your doorbell.
01 /
Charge the
Battery
02 /
Insert the
Battery
Charge the battery.
Notes:
1. Charge the battery before use. This will take
about 5~6 hours.
2. If you want to use the doorbell while charging the
battery, we recommend purchasing another
battery for your convenience.
Charging: Solid amber
Fully charged: Solid green
5V USB Charger
Tapo Video Doorbell Camera Kit
Quick Start Guide
04 /
Install the Doorbell
*Preview video on the Tapo app to nd the desired installation location.
Option 1. Stick to a clean wall Option 2. Mount to the wall
1. Stick the mounting template to the desired
mounting place. Drill two holes according to
the template.
(Optional) Use 15° Mounting Wedge to Adjust Angle
To adjust the viewing angle of the doorbell, you can use
the 15° mounting wedge within the package.
1. After drilling holes, insert two anchors into the holes.
2. Place the bracket above the wedge.
3. Use the screws to ax the wedge and bracket over
the anchors.
4. Attach the doorbell to the bracket.
1. Attach the included adhesive to the back of
the bracket.
2. Stick the bracket with adhesive to a clean
wall. Then attach the doorbell to the bracket.
2. Insert two anchors into the holes and use the
screws to ax the bracket over the anchors.
Then attach the doorbell to the bracket.
2. Insert the charged battery.
OR
1. Use a pin to detach the doorbell.
Wedge
(You can ip 180° to nd the appropriate angle.)
3M
3M