Specification

CONCRETE ANCHORS
DRIVING CONCRETE CONNECTIONS
TAPCON INSTALLATION ACCESSORIES
Tapcon concrete anchors are designed to work as a part of a system. The system includes the Condrive®
Installation Tool, the carbide tipped Tapcon® Drill Bit, and the Tapcon® anchor. For consistent performance,
it is recommended to use the entire system.
TAPCON DRILL BITS
PRO INSTALLATION KIT
• Ensure the precise drilling of pilot holes when installing
Tapcon anchors
• Masonry drill bits with a carbide tip
• Tapcon drill bits are sold separately and are also included
in the large packages of anchors (at select stores only)
• Makes installation of
Tapcon® Concrete Anchors
easy, fast, and accurate
• Designed for use with a
hammer drill and Tapcon
drill bits
• Eliminates the need for two
drills or extra nut drivers
• Installs both head styles
and all lengths of Tapcons
• Tool drives 3/16” and 1/4”
diameter Tapcons
• Colorstripe on drill bit package
corresponds to Tapcon Packaging.
• For installing 1/4" Tapcon
fasteners, use a 3/16"
Tapcon drill bit (Green Stripe)
• For installing 3/16" Tapcon
fasteners, use a 5/32"
Tapcon drill bit (Red Stripe)
3/16” DRILL BIT
FOR
1/4”
TAPCONS
5/32” DRILL BIT
FOR
3/16”
TAPCONS
Pick the correct drill bit diameter by
matching the color stripes on the packaging.
Fixture
Thickness
Recommended
Anchor Length
Drill Bit
Length
0 to 1/4” 1-1/4” 3-1/2”
1/4” to 3/4” 1-3/4” 3-1/2”
3/4” to 1-1/4” 2-1/4” 4-1/2”
1-1/4” to 3-1/4” 2-3/4” 4-1/2”
1-3/4” to 2-1/4” 3-1/4” 5-1/2”
2-1/4” to 2-3/4” 3-3/4” 5-1/2”
2-1/2” to 3” 4” 5-1/2”
1
2
3
4
5
6
Place correct Tapcon drill bit in
drill adapter and tighten set
screw with hex key (included).
For rotary hammer begin at Step 3.
Secure drill adapter into 3/8" - 1/2"
chuck of hammer drill or into 1/4"
impact hammer.
Attach appropriate hex driver
or star driver to end of sleeve.
Drill hole 1/4" deeper than
depth of anchor embedment.
(Min. embedment 1").
Remove dust from hole.
Slide sleeve over drill bit
and snap into drill adapter.
Insert anchor into the end of
the sleeve, position fixture to be
fastened and drive the Tapcon.
HOW TO USE
DRIVE
DRILL
SLIDE