User Manual

11 12Wall Fan Wall Fan
• NORMAL: LOW, MED-LOW, MED, MED-HIGH, HIGH.
• SLEEP : LOW, MED, HIGH.
• BREEZE : LOW, MED, HIGH.
N
O
RM
A
L
S
L
E
E
P
B
R
E
E
Z
E
H
I
G
H
M
E
D
-
LOW
M
E
D
-
H
I
G
H
LOW
M
ED
2
1
8
4
Remote Control Fan Modes Additional Features
User Servicing Instructions
Note: For added convenience, the same control buttons can be
found on the remote control.
This wall fan features a fused safety plug which is designed to cut
off electric current to the fan if an electrical fault occurs. If your fan
loses power and you suspect that the fuse on your fan has blown,
Power ON/Standby
Fan Speed -
Oscillation
Timer
Fan Mode
Fan Speed +
LED ON/OFF
Normal mode Running with selected constant speed.
Sleep Mode
Fan speed drops one level every 30 minutes until
the lowest then stays.
Breeze mode Fan speed cyclically changed for mimic natural wind.
Memory Function:
The fan is designed with power off memory function.
It will always remember your last settings (except
timer setting) once you turn it on again.
2
1
3
4
1
Grasp plug and remove from the receptacle or other outlet device. DO NOT
unplug by pulling on cord.
2
Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.
3
Remove fuse carefully. Insert the tip of your tool into fuse slot (close with
the terminal), then prize the fuse gradually and slowly, but not overexert. If
you feel tight, you can try it at several times and prize the fuse little by little.
When one side of the fuse has been prized, then you can get the fuse out
entirely. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
4
Close fuse cover. Slide closed the fuse access cover on top of attachment
plug. Risk of fire. DO NOT replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug
is damaged.