TaoTronics Laser Barcode Scanner User’s Manul SETUP from PC keyboard For KBW or KBW/RS232 interface 1
Features ＊ Simple installation ,keyboard Wedge Serial , Wand Emulation tc ＊ Superior keyboard wedge interface . NOVELL compatible – auto Caps lock detection ensures that the data always appears on the computer just the way it encoded in the bar code ＊ Simple programming from your keyboard or scan bar codes! ＊ Over 180 configurable options ＊ Automatically clones decoders in under 10 seconds .
Using The Setup Mode To Configure The Decoder The decoder can be configured through the use of the computer keyboard .
Setup Category key F1 Category Interface Options Transmit Speed CTRL/Special Char Delay Wedge Interface Send Numerics As Keyboard Country Output Mode Serial Baud Rate Serial Data Bits Serial Parity Serial Duples Serial Data Format Inverted Serial Output Serial Intercharacter Delay Serial Caps Lock Serial Num Lock Wand Emulation Appedd Mode Wand Emulation Max Segment Size Wand Emulation Segment Output Delay Setup Mode Lockout F2 Decoders/Scanner Decoders On/Pff Code 39 UPC/EAN/JAN UPC/EAN/JAN Supplement
F8 Status/Diagnostics Firmware Version and Release Date Laser/CCD Scanner Testing Keyboard Information Show Scan Codes F9 Cloning Lockout Cloned Reader Setup Mode Press ENTER To Begin Cloning F10 Reset All Defaults Reset All Defaults? Editing Keys For those categories which have more than one option , the UP and DOWN arrow and ENTER keys are used to move form one option to the next .
the field A SC I I All ASCII data is valid for the option .All characters are available for entry into the field . GROUP Used to indicate that the option represents a group of sub-options .The left and right arrows scroll through the list of option ..All characters are available for entry into the field 。 OPERATION Used to indicate that the option represents an edit operation and that all of the options listed below it are specific to that operation until the next operation is defined .
Setup from Bar Code Label Multiscan Functions-1 RESET CONFIGURATION TO DEFAULTS OUTPUT FIRMWARE VERSION OUTPUT MODE OUTPUT MODE – KEYBOARD WEDGE OUTPUT MODE - SERIAL OUTPUT MODE – WAND EMULATION OUTPUT MODE - RESET BUZZER/LED GOOD READ BEEP TONE - NONE GOOD READ BEEP TONE - RESET GOOD READ BEEP DURATION –MEDIUM LED POWER SAVE MODE - ENABLE 7
Multiscan Functions-2 IMAGE DECODE OPTIONS REVERSE IMAGE-ENABLE DECODE OPTIONS REVERSE IMAGE- DISAABLE CODE ID DECIDE OPTIONS SEND BAR CODE ID-DISABLE DECODE OPTIONS SEND BAR CODE ID-RESET DECODE OPTIONS SEND BAR CODE ID-AS A PREFIX DECODE OPTIONS SEND BAR CODE ID-AS A SUFFIX READING MODE LASER/CCD MODE-SINGLE SCAN LASER/CCD MODE-MULTISCAN LASER/CCD MODE-SINGLE SCAN NO TRIGGER LASER/CCD MODE-MULTISCAN NO TRIGGER LASER/CCD MODE-MULTISCAN LASER/CCD MODE-PULSE Interface – KBW PC Communication WEDGE
LINGUAGE KEYBOARD COUNTRY-USA KEYBOARD COUNTRY-GERMAN KEYBOARD COUNTRY-FRANCE KEYBOARD COUNTRY-UNIVERSAL Interface – Serial-1 2400 4800 9600 19200 HAND SHAKE SERIAL HANDSHAKE-NONE SERIAL HANDSHAKE-XON/OFF SERIAL HANDSHAKE-RTS/CTS SERIAL HANDSHAKE-ACK/NAK SERIAL HANDSHAKE TIMEOUT-2 SECONDS SERIAL HANDSHAKE TIMEOUT-5 SECONDS Interface – Serial-2 PARAMETERS SERIAL DATA BITS-8 SERIAL DATA BITS -7 9
SERIAL STOP BITS - 1 SERIAL STOP BITS - 2 SERIAL PARITY - NONE SERIAL PARITY - ODD SERIAL PARITY - EVEN SERIAL PARITY - MARK SERIAL PARITY - SPACE SERIAL PARITY - RESET Interface – WAND CODE 128 WAND EMULATION - ENABLE CODE 128 WAND EMULATION - DISABLE SPEED WAND EMULATION SPEED-FASTEST（0） WAND EMULATION SPEED-SLOWEST（3） BAR LEVEL WAND EMULATION-BAR=1(HIGH) WAND EMULATION-BAR=0(LOW) CODE 11 CODE 11-ENABLE CODE 11 - DISABLE 10 2
CODE 39 CODE 39 ENABLE CODE 39 - DISABLE FULL ASCII ENABLE FULL ASCⅡ DISABLE Symbologies On/Off—1 CODE 93 CODE 93 - ENABLE CODE 93 - DISABLE CODE 128 - ENABLE CODE 128 - DISABLE CODE 128 ISBT - ENABLE CODE 128 ISBT - DISABLE CODABAR CODABAR - ENABLE CODABAR - DISABLE INTERLEAVED 2 OF 5 12 OF 5 - ENABLE 12OF5 - DISABLE INDUSTRIAL 2 OF 5 ID2OF5- ENABLE ID2OF5 - DISABLE 11
Symbologies On/Off—2 MSI/PLESSEY MSI - ENABLE MSI - DISABLE UPC/EAN UPC—A ENABLE UPC—A DISABLE UPC—E ENABLE UPC—E DISABLE EAN—13 ENABLE EAN—13 DISABLE EAN—8 ENABLE EAN—8 DISABLE Symbologies Set Up—1 CODE 11 CODE 11 ID CHARACTER-‘m’ CODE 11 ID CHARACTER‘z’ CODE 11 LASER/CCD REDUNDANCY - ENABLE CODE 11 LASER/CCD REDUNDANCY - DISABLE CODE 39 CODE 39 SS CHAR - NONE CODE 39 SS CHAR’+’ 12
CODE 39 SEND STAR/STOP CHARS ENABLE CODE 39 SEND START/STOP CHARS DISABLE CODE 39 ID CHARACTER ‘a’ CODE 39 ID CHARACTER‘z’ CODE 39 LASER/CCD REDUNDANCY ENABLE CODE 93 ID CHARACTER ‘h’ CODE 39 LASER/CCD REDUNDANCY DISABLE Symbologies Set Up—2 CODE 93 CODE 93 ID CHARACTER‘z’ CODE 93 LASER/CCD REDUNDANCY-ENABLE CODE 93 LASER/CCD REDUNDANCY-DISABLE CODE 128 CODE 128 ID CHARACTER ‘g’ CODE 128 ID CHARACTER‘z’ CODE 128 LASER/CCD REDUNDANCY-ENABLE CODE 128 LASER/CCD REDUNDANCY- DISABLE CODABAR CODABAR
CODABAR WIDE GAPS ALLOWED-ENABLE CODABAR WIDE GAPS ALLOWED- DISABLE Symbologies Set Up—3 CODABAR CODABAR ID CHARACTER-k CODABAR ID CHARABTER-z CODABAR LASER/CCD REDUNDANCY-ENABLE 12OF5 ID CHARACTER-i CODABAR LASER/CCD REDUNDANCY-DISABLE Interleaved 2 of 5 12OF5 ID CHARACTER-z 12OF5 LASER/CCD REDUNDANCY-ENABLE CODABAR LASER/CCD REDUNDANCY-DISABLE Industrial 2 of 5 ID2OF5 ID CHARACTER-j ID2OF5 CHARACTER-z ID2OF5LASER/CCD REDUNDANCY-ENABLE MSI ISBN ID CHARACTER-f ID2OF5LASER/CCD REDUNDANCY-DISAB
0053f MSI LASER/CCD REDUNDANCY-ENABLE 0053z MSI LASER/CCD REDUNDANCY-DISABLE UPC/EAN EXPAND UPC-E TO UPC-A ENABLE EXPAND UPC-E TO UPC-A DISABLE EXPAND UPC-A TO EAN-13 ENABLE CONVERT EAN-13 TO ISBN ENABLE EXPAND UPC-ATO EAN-13 DISABLE CONVERT EAN-13 TO ISBN DISABLE UPC-A ID CHARACTER-b UPC-A ID CHARACTER-z Symbologies Set Up—5 UPC/EAN UPC-E ID CHARACTER-c UPC-E ID CHARACTER-z 15
EAN-13 ID CHARACTER-e EAN-13 ID CHARACTER-z EAN-8 ID CHARACTER -d EAN-8 ID CHARACTER -z ISBN ID CHARACTER -f ISBN ID CHARACTER -z UPC/EAN SUPPLEMENTS-DISABLE UPC/EAN SUPPLEMENTS-5DIGIT ONLY UPC/EAN SUPPLEMENTS-2DIGIT ONLY UPC/EAN SUPPLEMENTS-2DIGIT ONLY Symbologies Set Up—6 UPC/EAN UPC/EAN LASER/CCD REDUNDANCY ENABLE UPC/EAN LASER/CCD REDUNDANCY DISABLE EDIT SETUP BAR CODES EDIT #1 – STRIP 1 LEADING CHARACTER ON ALL BAR EDIT #1- OFF CODES THAT START WITH ‘12345’ 16
EDIT #2 – STRIP 1 TRAILING CHARACTER EDIT #2 - OFF EDIT #1 – FILTER LEADING SPACES EDIT #1 - OFF EDIT #1 – FILTER TRAILING SPACES EDIT #1 - OFF EDIT – FILTER CHARACTERS EDIT-DISABLE FILTERING OF ALL CHARS EDIT-INSERT LEADING ZERO EDIT- DISABLE INSERT LEADING ZERO MACRO/SPECIAL KEYS SETUP BAR CODES MACRO #1-FIND’1’AND PRPLACE WITH’ONE’ MACRO #1-DISABLED MACRO #2-FIND‘2’AND REPLACE WITH ‘TWO’FOR CODE 39 ONLY MACRO-FIND’0’AND REPLACE WITH’A’ SPECIAL KEY-MAP F3 TO‘0’ MACRO #2-DISABLED 换 MACRO-FIN
SPECIAL KEY-MAP KEYPAD ENTER TO ‘2’ SPECIAL KEY-DISABLE KEYPAD ENTER MAPPING TERMINATION STRING SETUP BAR CODES STRING#1-TERMINATION CHAR-CR STRING#1-TERMINATION-LF STRING#1-TERMINATION CR+LF STRING#2-CODE128TERMINA TION CHAR-CR STRING#2-CODE128 TERMINATION CHAR-CR+LF STRING-CODE 39 TERMINATION CHAR-TAB STRING#1-DISABLED STRING#2-CODE 128TERMINATION CHAR-LF STRING#2-CODE 128TERMINATION CHAR-LF STRING-CODE39 TERMINATION CHAR-TAB-REMOVED STRING- ALL CODES PREAMBLE-STX STRING-ALL CODES POSTAMBLE-ET
ACTION DESCRIPTION A DISPLAY DECODER FIRMWARE VERSION NUMBER B RESET DECODER OR OPTION TO DEFAULT SETTINGS C ENTER KEYBOARD PROGRAMMING MODE-ACTIVE ONLY WHEN IN KEYBOARD WEDGE MODE 19
OPTION NUMBERS AND DESCRIPTIONS F1-INTERFACE OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT WEDGE BYTE 0 99 0-FASTEST 001 SPECIAL CHAR TRANSMIT DELAY BYIE 0 255 50-(MSECS) 002 KEYBOARD WEDGE MODE 4BIT 0 6 0-(AUTODETECT) 003 AUTO-DETECT CAP LOCK BIT 0 1 0-( AUTODETECT） 004 NUMERIC BIT 0 1 0-(MAIN KBD KEYS) 000 KEYBOARD TRANSMIT SPEED KEY OUTPUT MODE 005 KEYBOARD COUNTRY BYIE 0 25 0-（USA） 006 DECODER OUTPUT MODE 4BIT 0 2 0-(KEYBRD WEDGE） 007 SERIAL
026 APPEND MODE BIT 0 1 0- DISABLED 027 SECONDARY START/STOP CHARS 4BIT 0 1 0-无 028 SEND START/STOP CHARS BIT 0 1 0- DISABLED 029 MAXIMUM LENGTH BYTE 0 49 49 030 MINIMUM LENGTH BYTE 0 49 0 031 ID CHARACTER CHAR 1 1 ‘a’ 032 CONTROL OVERRIDE BIT 0 1 0- DISABLED 033 LASER/CCD REDUNDANCY BIT 0 1 0- DISABLED CHARACTER ;F2-UPC/EAN OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT 034 UPC-A DECODER BIT 0 1 1-ENABLED 035 UPC-E DECODER BIT 0 1 1
059 EAN-8 SUPPLEMENTS 2BIT 0 2 1- OPTIONAL 060 ISBN SUPPLEMENTS 2BIT 0 2 1- OPTIONAL 061 SUPPLEMENTS SEPARATOR STRING 0 9 NONE ;F2CODE-93 OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT 062 CODE 93 DECODER BIT 0 1 1-ENABLED 063 APPEND MODE BIT 0 1 0-DISABLED 064 MAXIMUM LENGTH BYTE 0 81 81 065 MINIMUM LENGTH BYTE 0 81 0 066 ID CHARACTER CHAR 1 1 ‘h’ 067 CONTROL OVERRIDE BIT 0 1 0-DISABLED 068 LASER/CCD REDUNDANCY BIT 0 1 0-DISABLED CH
；F2 CODABAR OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT 085 CODABAR DECODER BYTE 0 1 1—ENBALED 086 SEND START/STOP CHARACTERS 2BIT 0 3 0—DISABLED 087 CHECK DIGIT 2BIT 0 2 0—DISABLED 088 SEND CHECK DIGIT BIT 0 1 0—DISABLED 089 CLSI FORMATTING BIT 0 1 0—DISABLED 090 WIDE GAPS BIT 0 1 0—DISABLED 091 ABD CONCATENATION BIT 0 1 0—DISABLED 092 MAXIMUM LENGTH BYTE 1 62 62 093 MINIMUM LENGTH BYTE 1 62 1 094 ID CHARACTER CHAR 1 1 ‘k’ 095 L
；F2-MSI OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT 115 MSI DECODER BIT 0 1 1-ENABLED 116 CHECK DIGITS 2BIT 0 2 0-MOD 10 117 SEND CHECK DIGITS 2BIT 0 2 0-DISABLED 118 ISBN DECODER BIT 0 1 0-DISABLED 119 MAXIMUM LENGTH BYTE 3 63 63 120 MINIMUM LENGTH BYTE 3 63 3 121 FIXED LENGTH BIT 0 3 0-DISABLED 122 FIXED LENGTH SIZE # 1 BYTE 3 63 6 123 FIXED LENGTH SIZE # 2 BYTE 3 63 14 CHAR 1 1 ‘I’ 124 ID CHARACTER 053 ISBN ID CHARACTER 125
；F2 –OTHER DECODING OPTIONS OPTION NUMBER DESCRIPTION TYPE MIN MAX DEFAULT 138 QUIET ZONES (MARGINS) BIT 0 1 1-LARGE 139 REVERSE IMAGE DECODING BIT 0 1 0-DISABLED 140 SEND BAR CODE TYPE ID BIT 0 1 0-DISABLED ；F7-DEFINE THE BUZZER AND LED OPTIONS NUMBER OPTION TYPE MIN DESCRIPTION 141 POWER UP BEEP 142 GOOD READ TONE 4BIT BEEP 143 GOOD READ DURATION 144 NO READ LED DELAY 145 LED POWER MODEBIT MAX DEFAULT BIT 0 1 1-ENABLED 4BIT 0 5 2-MEDIUM BEEP BYTE 0 2 1-ME
172 INSERT KEY MACRO BYTE 0 255 255- OFF 173 DELETE MACRO BYTE 0 255 255- OFF 174 HONG KEY MACRO BYTE 0 255 255- OFF 175 END KEY MACRO BYTE 0 255 255- OFF 176 PAGE UP MACRO KEY BYTE 0 255 255- OFF 177 PAGE DOWN MACRO KEY BYTE 0 255 255- OFF 178 LEFT ARROW KEY MACRO BYTE 0 255 255- OFF 179 RIGHT ARROW KEY MACRO BYTE 0 255 255- OFF 180 UP ARROW MACRO KEY BYTE 0 255 255- OFF 181 DOWN ARROW KEY MACRO BYTE 0 255 255- OFF 182 KEY PAD ENTER KEY MACRO
LEADING CHARACTERS 04—FILTER TRAILING CHARACTERS 05—FILTER CHARACTERS 06—INSERT LEADING CHARACTER 07—INSERT TRAILING CHARACTER 08—CONVERT TO UPPERCASE 09—CONVERT TO LOWERCASE 2DIGIT ACTIVE FOR TYPE （00—14） 00—ALL BAR CODE TYPES 01—ALL BAR CODE TYPE ALWAYS 02—CODE 39 03—UPC—A 04—UPC—E 05—EAN—13 06—EAN—8 07—ISBN 08—CODE 128 09—I 2OF5 10—CODABAR 11—CODE93 12—MSI 13—CODE11 14—INDUSTRIAL 2OF5 2DIGIT ACTIVE FOR SIZE （00—99） 3DIGIT BYTE 1 VALUE 3DIGIT BYTE 2 VALUE 3DIGIT BYTE 3 VALUE 3DIGIT CONTAINS OFFSET 000—25
；F4-MACRO SETUP BAR CODE OPTION NUMBER DESCRIPTION TYPE 201 MACRO OPTION SEE BELOW MIN MAX DEFAULT MACRO BAR CODE DATA FORMAT 2DIGIT MACTRO# （00-10） 00-WILL AUTOMATICALLY SELECT THE FIRST 2 DIGIT ACTIVE FOR TYPE(00-15) 00-NONE 01-ALL BAR CDOE TYPE 02-ALL BAR CODE TYPES ALWAYS 03-CODE 39 04-UPC-A 05-UPC-E 06-EAN-13 07-EAN-8 08-ISBN 09-CODE 128 10-12OF5 11-CODABAR 12-CODE-93 13-MSI 14-CODE 11 15-INDUSTRIAL 2OF5 28
；F5-STRING SETUP BAR CODE OPTION NUMBER 202 DESCRIPTION TYPE MIN STRING BAR CODE DATA FORMAT 2 DIGIT STRING #（00-10） 00-WILL AUTOMATICALLY SELECT THE FIRST 1 DIGIT STRING TYPE（0-3） 0-OFF 1-TERMINATION 2-PREAMBLE 3-POSTAMBLE 2 DIGIT ACTIVE FOR TYPE（00-14） 00-ALL BAR CODE TYPES 01-ALL BAR CODE TYPES ALWAYS 02-CODE 39 03-UPC-A 04-UPC-E 05-EAN-13 06-EAN-8 07-ISBN 08-CODE 128 09-12OF5 10-CODABAR 11-CODE 93 12-MSI 13-CODE 11 14-INDUSTRIAL 2 OF 5 1 DIGIT SCAN DIRECTION（0-2） 0-ANY DIRECTION SCAN 1-FORWARD SCAN
