TAOTRONICS SoundLiberty A10 Questions or Concerns? support@taotronics.
T A B L E O F C O N T E N T CONTENTS SETTING UP YOUR EARBUDS (01-02) USING YOUR EARBUDS (02-06) CLEANING AND MAINTENANCE (06) TROUBLESHOOTING GUIDE (07-09) S
SETTING UP YOUR EARBUDS 1 2 Wearing 3 4 1 5 6 7 Charging 8 9 Charging Slot Charging Indicator Reset Button USB-C Charging Port Multifunction Touch Control We highly recommend that you fully charge the earbuds before using them for the first time. 1. Place the earbuds into the charging case. 2. Close the case and connect to any USB charging port with the included cable.
Power ON / OFF Bluetooth Pairing - Binaural Mode 1. Uncover the lid to turn on the earbuds, both earbuds will connect with each other automatically. 2. Turn on the Bluetooth function on your device and search for nearby devices. 3. Find “TaoTronics A10” in the search results, tap to connect. ON ON Uncover the lid to power on. TaoTronics A10 OFF Place back and close the case to power off.
Bluetooth Pairing - Mono Mode • When Bluetooth connected, you can use either one of the earbuds as per your preference. • Take out one earbud, and make sure the other one is placed in the case with the lid covered. x1 x2 Single Tap Double Tap x3 Triple Tap Hold If you want to change to binaural mode, simply take out the other earbud from the charging case, they will pair with each other automatically.
Resetting Your Earbuds Reset the earbuds if failed to connect with your device properly. 1. Remove "TaoTronics A10" from the Bluetooth device list. 2. Place the earbuds back into the charging case and keep the cover open. 3. Press and hold the Reset Button for 10 seconds until the LED indicator on the charging case flashes white three times. TROUBLESHOOTING GUIDE Earbuds fall off easily : Wearing Securely wear the earbuds (see “Wearing”).
Sound Help Poor sound quality : Failed to charge the earbuds / charging case : • Try a quiet indoor environment. • Clear any debris from the earbud nozzles. • Place both devices close to each other or remove the obstacles between them. • Try a different audio source or device. • For poor call quality, check that the microphone is not blocked or covered. • Make sure there is no dirt or debris covering the charging contacts on the earbuds or the charging pins in the case.
IMPORTANT SAFETY INSTRUCTIONS Please read the instructions thoroughly before using this product and retain it for future reference. HEARING SAFETY • DO NOT wear earbuds with high volume for a long time to avoid damaging your hearing. • Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference. • DO NOT set volume too high to stay aware of your surroundings.
WEEE COMPLIANCE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life.
