User Manual

ManualsBrandsTaoTronics ManualsAir purifiersHEPA H13 Air Purifier for Home, Allergies Smoke Pollen Pets, Home Air Cleaner Filtration System, Odors Dust, Sleep Mode Timer Auto Mode Negative Ion Mode, Air Quality Indicator

Installing and Removing the Filter

Note:

1. when the unit is on, the Air Quality indicator will light up to show the current

air quality:

2. To achieve better purif ication, make sure to

keep the puriﬁer 30 centimeters / 11.8 inches

away from walls, furniture and so on and at

least 50 centimeters / 19.7 inches away from

metals / electrical appliances.

3. In sleep mode, press the Sleep Button once to

check the current settings. Press twice to turn

off the sleep mode.

4. In automatic wind mode, the unit will adjust

the fan speed according to the results read by

the dust sensor (dust concentration).

Air Quality Indicator

Green Orange Red

Air Quality Good Moderate Unhealthy

PM2.5

11.8inches

30cm

11.8inches

30cm

Wall Wall

1. Use soft brushes to dust off the f ilter regularly for better purif ication. Don’t wash it with water.

2. Replace the f ilter when the Change Filter Reminder ﬂashes:

ｖ!Unplug the power source.

ｗ Remove the rear grille.

ｘ Take out the old f ilter by pulling the tabs.

ｙ Install a new or the cleaned f ilter and put the rear grille back on.

ｚ Press and hold the ION Button for 3 seconds to reset the unit. The Change Filter Reminder

will turn off.

PUSH

POWER

Filter

FAN

Low

Mid

High

Turbo

TIMER SLEEP ION

Press 3s, to reset FilterPress 3s, Auto mode

ｖｗ

ｘｙ

ｚ

08 10 12 14

16 18 20 22

24 26 28 30 32 34

01 03

09 11 13 15

17 19 21 23

25 27 29 31 33

EN EN