User's Manual
Installing the Tantalus XR-3100 page 7
Version 1.03 , Released: 2005-12-09
INSTALLATION INSTRUCTIONS FOR THE FIELD
Warning
This product should not be installed during heavy rain or snow as there may
pose a risk of electric shock.
1. Remove the XR-3100 from the packaging. Ensure that you have a battery for the device,
but do NOT install it until step 4.
Warning
1. Ensure that there is no power source connected to the XR-3100.
2. Ensure that both battery compartments are empty.
2. Remove the cover and mount the XR-3100 by one of the following methods:
Flat wall:
The XR must be mounted to a flat surface that will engage all four mounting screws. This is
important to ensure adequate environmental sealing. The XR-3100 comes with 4 mounting screws
for mounting to wood or sheet metal.