User's Manual

Page 4 Tantalus Systems Corp.
Released: 2010/1/31
2.2 Registering the NC-900 on the Network
Each NC-900 Network Collector must be registered on the Tantalus Network Server as part of the
activation process. This must be done by individually configuring the 4 NC-90 modules situated in
the NC-900 Network Controller.
Each NC-90 module in the NC-900 has a unique identifier called the Network ID located on an
outside label. No two devices produced by Tantalus have the same Network ID.
To successfully activate an NC-900 on a server, you must record or scan the 10-digit TUNet
Network ID located on the label on the back of the NC-900 and enter it into the Network Server.
Refer to Working with WAN Portals in the TUNet User Guide: Network Administrator for details on
where to enter this information.