User's Manual

Page 12 Tantalus Systems Corp.
Released: 2010/1/31
3.2.3 Configuring Options
The DT-400 Programmer laptop is designed to be directly connected to the NC-90 without requiring a
switch or router. The laptop has a DHCP server that distributes a specific IP address to any NC-90 that
requests one.
You can use the Device IP option to control which IP address the laptop assigns to the NC-90 for
purposes of programming. Most of the time you will just use the default address. But under certain
circumstances, you may want to update the IP address from the default setting. For example, you might
do this if a statically addressed NC-90 requires reprogramming.
CONFIGURING A SPECIFIC IP ADDRESS
1. To configure a specific IP address, choose 3.
2. Enter the IP address that the program will attempt to communicate to or press enter to accept
the default in brackets.
3. Press <enter> to save the settings to the programmer.
Tantalus DT-400 Device Configuration Tool (version 200.0004).
Select one of the following options
1) Configure for Static Network Address
2) Configure for DHCP
3) Options (DeviceIP=24.25.26.28)
4) Copy log file to USB memory stick
5) View log file
6) Help
7) Quit
[2]>3
Device IP Address (24.25.26.28)>_