User's Manual

Page 8 Tantalus Systems Corp.
Released: 2010/1/31
3.2.1 Configuring a Dynamic Network Addressing Scheme
Dynamic network addressing is the simplest network addressing scheme to setup and to maintain.
TO CONFIGURE A DYNAMIC NETWORK ADDRESSING SCHEME
Note: Make sure that the cable from the DT-400 is plugged into the NC-90 and is powered up. The
NC-90 is ready for configuration when the status light on the NC-90 is either solid red, flashing
orange, or flashing red.
1. To configure for DHCP, choose 2.
2. At each prompt, enter the network settings provided by your Network Administrator or press
<enter> to accept the last entered values shown in brackets (green).
Tantalus DT-400 Device Configuration Tool (version 200.0004).
Select one of the following options
1) Configure for Static Network Address
2) Configure for DHCP
3) Options (DeviceIP=24.25.26.28)
4) Copy log file to USB memory stick
5) View log file
6) Help
7) Quit
[2]>2
TZ offset(5)>
IPNM Address (10.1.1.75)>
IPNM Port(12345)> _
TZ Offset:
Timezone offset is the number of hours to be added to the local STANDARD time
to obtain Universal Time (UTC).
Time Zone Hours to Input
Pacific (PST) 8
Mountain (MST) 7
Central (CST) 6
Eastern (EST) 5
Atlantic (AST) 4