User's Manual

TUNet NC-900 Network Collector Install Guide page 7
Doc No. KT-100036
3.2 TUNet User Account
Before you can use the DT-400 programmer to program the NC-90, you must choose between a
dynamic or static network addressing scheme. Tantalus recommends dynamic addressing in all cases,
unless there is a specific technical reason that static addressing must be used instead.
If you are unclear about which addressing scheme to choose, speak to your Network Administrator.
LAUNCHING DEVICE CONFIGURATION
1. Log in to the DT-400 laptop. The DT-400 Device Configuration Tool will start automatically and
you will see a menu of the available options.
2. Select one of the available options:
Tantalus DT-400 Device Configuration Tool (version 200.0004).
Select one of the following options
1) Configure for Static Network Address
2) Configure for DHCP
3) Options (DeviceIP=24.25.26.28)
4) Copy log file to USB memory stick
5) View log file
6) Help
7) Quit
[2]>_