User's Manual

Overview
4 Proprietary and Confidential 2006-03-04
About This Document
The NC-2202 Installation Guide describes the requirements to complete a typical installation. Site conditions will
vary from site to site however the basic requirements for power, grounding and antenna connection will be the same.
Overview of Contents
This document contains the following sections:
• Overview describes the Tantalus Utility Network.
• Site Requirements describes the basis site requirements that apply to all sites.
• Equipment Description describes the major subsystems in the NC-2202
• Installation describes the required power, antenna and network connections
• Initial Configuration and Testing describes the minimum initial configuration required to put the NC-2202
into service.
FCC Compliance Statement
Changes or modifications not expressly approved by Tantalus Systems Corp. may void your authority to operate the
equipment described in this manual.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Referenced Documents
NC-2202 Network Administration Guide, P/N 900.0003