User's Manual

Enter Code To Arm
Open zones are displayed first
Bypass?
Press the Yes/No key to bypass the displayed
zone.
“Zone Name”
After selection the next zone is displayed.
Bypass?
“O” will appear if a zone is open and not
bypassed.
“Zone Name” O
Bypass?
“B” will appear on the display to show the zone is
“Zone Name” B
bypassed.
After 5 seconds of inactivity display returns to 5A
If system is now ready to arm display shows…
System Ready
Bypass active
Bypass On
Press Menu/Test again for additional menu items.
The Master code must have been entered.
MM/DD/YY HH:MM
Enter Date and Time or press Menu for next menu item.
Door Chime OFF
Yes turns door chime on, No leaves it off
Turn ON?
Press Menu/Test again
Edit Access Codes
Select number of access code to edit, “M” represents the
master code.
1(M) 2 3
Access Code 2
Enter new code or press Menu to return to ” Edit
Access Codes”
XXXX
Code is XXXX
Press Yes to confirm
Confirm?
Replacing System Components
Replace System
Press the Yes key to replace system components.