User's Manual

Quick Access User Manual
1. Introduction
Congratulations on purchasing the Tantalus TSC Security System
– This system is so simple you shouldn’t need a user manual.
2. Using the Keypad
The keys on the user keypad have functionality as described below.
0 - 9
Used to enter access codes and change Date and Time
Panic
Sounds an Alert and registers a Panic condition to the
Monitoring Station
Fire
Sounds an Alert and registers a Fire condition to the
Monitoring Station
Home/Away
Selects home or away mode for system srming
Arm
Quick arm the system . Exit through entrance/exit door
when system already armed.
Meter
Selects meter and displays consumption
Yes/No
Yes, No selection (sub-keys on
7
and
0
keys)
Test
Displays menu items on keypad display.
3. Arming The System
The system can be armed as described below.
Zone(s) Open
Green light is OFF.
Zone name
Check that all the doors and windows are closed and
that motion has stopped in areas covered by motion
detectors.
System Ready
Green light is ON .
Enter Code To Arm
Enter your access code. As each digit of the code is
entered, an “X” will appear on the Keypad screen.
System Armed
The Red light will flash.
Exit Delay On
The keypad beeper sound for the duration of the exit
period. You may leave through the exit door and all
sensors will be armed or stay and the system will sound