Specification Sheet

VXNET 12
Technical Data Sheet
Specifications
tannoypro.com
V 2.10 - 25/11/15
Performance
System type
Full Range - Vented
Frequency response (-3 dB)
(1)
70 Hz - 25 kHz
Frequency range (-10 dB)
(1)
55 Hz - 38 kHz
Rated maximum SPL
(2)
Average 121 dB
Peak 127 dB
Dispersion (-6 dB)
90 degrees conical
Driver Complement
1 x 300 mm (12”) Dual Concentric
Crossover (DSP Generated)
1.5 kHz and variable high pass lter
for use with subwoofers
Directivity Factor (Q)
9.6 averaged 1 kHz to 8 kHz
Directivity Factor (DI)
9.8 averaged 1 kHz to 8 kHz
Distortion
10% full power (12.7 V) Harmonics
2nd 3rd
250 Hz
0.52% 0.58%
1 kHz
2.98% 0.63%
10 kHz
3.58% 0.19%
1% full power (4 V)
250 Hz
0.14% 0.26%
1 kHz
0.38% 0.58%
10 kHz
1.02% 0.03%
Electronics
Efciency
> 85% typically
Damping Factor
120 ref 8 Ω
Distortion
< 0.05% @ 1 kHz -3 dB output
(22 kHz handwidth)
Input Impedance
5.6 k Ω unbalanced,
11.2 k Ω balanced
Input Sensitivity
1.4 V (+5.5 dBu)
System Type
Dual channel Class D (Bridged)
DSP system
Comms Facilities
Firmware updatable and selected
parameters editable
Communications
Serial - RS485
Proprietary message format
Dynamic Range
112 dB (A) typical
DSP
3rd generation SHARC
Sampling Frequency
96 kHz 24 bit A/D - D/A
word length
Format
1 IN = 2 OUT
Construction
Enclosure
36.4 litres, 15 mm (enclosure) and
18 mm (front) birch plywood,
vented and internally braced
Finish
Textured black or white paint
(custom colours on request)
Powder coated steel grille with
airnet cloth behind
Connectors
1 x female XLR (input)
1 x male XLR (link)
1 x RJ45 (network in)
1 x RJA5 (network link)
1 x Neutrik Powercon
Controls & Indicators
LED on front of cabinet behind
grille (wink indicator for locating
& assigning)
Power LED (blue)
Signal LED (green)
Limit LED (red)
User DSP - defeat switch
Power Switch
Fittings
8 x M10 Flying inserts (portrait or
landscaping mounting)
8 x M10 Yoke Bracket Inserts,
1 x Integrip carrying handle,
Blanking plate for optional
VTH pole mount
Dimensions
H: 486 mm (19.13”)
W: 370 mm (14.57“)
D: 360 mm (14.17”)
Weight
17 kg (37.44 lbs)
PSU Specications
Input Connector
Locking Neutrik Powercon
Voltage Selection
Automatic (115 / 230 V, 45 - 65 Hz)
Type
High current, high freq. switch-mode
Efciency
> 90% typical
Input voltage
100 V / 115 V /
230 V nominal +/- 10%
Mains fuse
External
Fuse type
T10AT
Other features
Automatic soft-start
Ordering Information
Part Number Colour
8001 7050 Black
8001 7051 White
Notes:
1. Average over stated bandwidth, measured at
1 metre on axis.
2. Unweighted pink noise input, measured at
1 metre in an anechoic chamber.
A full range of measurements, performance data,
and Ease™ Data can be downloaded from
www.tannoypro.com
Tannoy operates a policy of continuous research
and development. The introduction of new materials
or manufacturing methods may introduce variations
in actual performance; however, actual performance
always will equal or exceed the published
specications, which Tannoy reserves the right to
alter without prior notice. Please verify the latest
specications when dealing with critical applications.
Copyright (c) 2015 Tannoy Limited. All rights reserved.