VQ - Brochure

VNET 15DR data file // issue 1.00 // 03.08.09
VNET 15DR
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB)
(1)
50Hz - 3500Hz
Frequency Range (-10dB)
(1)
38Hz - 4500Hz
Rated Maximum SPL
(2)
130dB (average) 136dB (peak)
Driver Complement 380mm (15”) Bass driver
Crossover (DSP Generated) Variable low pass filter
Distortion
10% Full Power (28.3V) 2nd Harmonic 3rd Harmonic
40Hz 1.42% 1.83%
100Hz 0.40% 0.33%
1% Full Power (8.94V) 2nd Harmonic 3rd Harmonic
40Hz 0.68% 2.20%
100Hz 0.09% 0.32%
System Bass loudspeaker - Direct radiator
PART NUMBER MODEL NAME COLOUR PACKED QUANTITY
8001 5660 VNET 15DR BLACK 1
8001 5661 VNET 15DR WHITE 1
Ordering Information
Construction
Enclosure 89.9 litres, 18mm (5/8”) birch
plywood internally braced.
Grill Powder coated steel grille
Finish Textured black or white paint
(custom colours on request).
Connectors 1 x female XLR (input)
1 x male XLR (link)
1 x RJ45 (network in)
1x RJ45 (network link)
1 x Neutrik Powercon
Controls & Indicators LED on front of cabinet behind
grill. (wink indicator for locating
& assigning)
Power LED (Blue)
Signal LED (Green)
Limit LED (Red)
User DSP - defeat switch
Power Switch
Fittings 2 x Recessed carrying handles
12 x M10 flying inserts
4 x Rubber feet
Dimensions (HxWxD) 510mm x 694mm x 515mm
(20.08" x 27.32" x 20.28")
Weight 36kg (79.2 lbs) net
40kg (88.1 lbs) shipping
Electronics
Efficiency >85% typically
Damping Factor 120 ref 8 Ohms
Distortion <0.05% @ 1kHz -3dB output
22kHz bandwidth)
Input Impedance 5.6kOhms unbalanced,
11.2kOhms balanced
Output Power (Programme) 1200W
Input Sensitivity 1.4V (+5.5dBu)
System Type Dual channel Class D (Bridged)
DSP System
Comms Facilities Firmware updatable and selected
parameters editable
Communications Serial - RS485 Proprietary message format
Dynamic Range 112dB(A) typical
DSP 3rd generation SHARC
Sampling Frequency 96kHz 24 bit A/D-D/A word length
Format 1 IN - 1 OUT
PSU Specifications
Input Connector Locking Neutrik Powercon
Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
Type High current, high freq. switch-mode
Efficiency >90% typical
Input voltage 100v / 115v / 230v nominal +/-10%
Mains fuse External
Fuse type T10AT
Other features Automatic soft-start
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in half space
A full range of measurements, performance data, and Ease™ Data can be downloaded from
www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new
materials or manufacturing methods will always equal or exceed the published specifications,
which Tannoy reserves the right to alter without prior
VQ Bookletv0909aw:Layout 1 4/9/09 11:24 Page 39