VQ - Brochure

VQ NET MB data file // issue 1.04 // 30.07.09
VQ NET MB
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
TECHNICAL SPECIFICATIONS
System Type Mid Bass - Vented
Frequency Response (-3dB)
(1)
115Hz - 500Hz
Frequency Range (-10dB)
(1)
90Hz - 600Hz
Rated Maximum SPL
(2)
135dB (average) 141dB (peak)
Driver Complement 2 x 300mm (12.00”) Low
Frequency Transducers, Semi
Horn Loaded
Crossover (DSP Generated) Variable Lowpass filter
System
PART NUMBER MODEL NAME COLOUR PACKED QUANTITY
8001 5390 VQ NET MB BLACK 1
8001 5391 VQ NET MB WHITE 1
Ordering Information
Electronics
Efficiency >85% typically
Damping Factor 120 ref 8 Ohms
Distortion <0.05% @ 1kHz -3dB output
22kHz bandwidth)
Input Impedance 5.6kOhms unbalanced,
11.2kOhms balanced
Output Power (Programme) 2000W
Input Sensitivity 1.4V (+5.5dBu)
System Type Dual channel Class D
DSP System
Comms Facilities Firmware updatable and selected
parameters editable
Communications Serial - RS485 Proprietary message format
Dynamic Range 112dB(A) typical
DSP 3rd generation SHARC
Sampling Frequency 96kHz 24 bit A/D-D/A word length
Format 1 IN - 2 OUT
PSU Specifications
PSU Specifications
Input Connector Locking Neutrik Powercon
Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
Type High current, high frequency
switch mode
Efficiency >90% typical
Input voltage 100v / 115v / 230v nominal +/-10%
Mains fuse External
Fuse type T10AT
Other features Automatic soft start
Current Draw 115V 230V
Startup (inrush) 3.5A 1.9A
idle 1.0A 0.56A
Max 3.5A 1.7A
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber, then referred to 1 metre
A full range of measurements, performance data, and Ease™ Data can be downloaded from
www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new
materials or manufacturing methods will always equal or exceed the published specifications,
which Tannoy reserves the right to alter without prior notification
Construction
Enclosure 18mm (0.71") birch plywood.
Vented and internally braced.
Grill Powder coated perforated steel.
Stainless steel on weatherproof
version.
Finish Textured black or white paint
(custom colours on request).
Connectors 1 x female XLR (input)
1 x male XLR (link)
1 x RJ45 (network in)
1x RJ45 (network link)
1 x Neutrik NL4 (Amp ch2 Output)
1 x Neutrik Powercon (outlet)
Controls & Indicators LED on front of cabinet behind
grille. (wink indicator for
locating & assigning)
Power LED (blue)
Signal LED (Green)
Limit LED (Red)
User DSP - defeat switch
Power switch
Fittings 2 x Recessed carrying handles
12 x M10 flying inserts
Dimensions (HxWxD) 433mm x 694mm x 515mm
(17.05" x 27.32" x 20.28")
NET Weight 41kg
VQ Bookletv0909aw:Layout 1 4/9/09 11:23 Page 35