VQ - Brochure

VQ NET DF
Tannoy adopts a policy of continuous improvement and product specification is subject to change
VQ NET DF data file // issue 1.03 // 30.07.09
System Type 2-Way Mid/High - Point Source
Frequency Response (-3dB)
(1)
400Hz - 23kHz
Frequency Range (-10dB)
(1)
350Hz - 27kHz
Dispersion H x V (-6dB)
VQ NET 40DF 40 x 40 degrees
VQ NET 64DF 60 x 40 degrees
VQ NET 85DF 80 x 50 degrees
Driver Complement
MF/HF Dual Concentric™ Compression
driver loaded into a single
PSW™ Waveguide
Crossover HighPass Filter @ 450Hz DSP
Generated and 7kHz
Directivity Factor (Q) 32.1(VQ NET 40DF)
averaged 1kHz to 10kHz 23.5(VQ NET 64DF)
12.4(VQ NET 85DF)
Directivity Index (DI) 15.1(VQ NET 40DF)
averaged 1kHz to 10kHz 13.7(VQ NET 64DF)
10.9(VQ NET 85DF)
Rated Maximum SPL
(2)
Average Peak
VQ NET 40DF 135dB 141dB
VQ NET 64DF 134dB 140dB
VQ NET 85DF 133dB 139dB
Construction
Enclosure 18mm (0.71") birch plywood.
Vented and internally braced
Grille Powder coated perforated
steel grille. Stainless steel on
weatherproof version.
Finish Black or white textured paint
(custom colours on request)
Connectors 1 x female XLR (input)
1 x male XLR (link)
1 x RJ45 (network in)
1 x RJ45 (network link)
1 x Neutrik Powercon
1 x Neutrik Powercon (outlet)
Controls & Indicators LED on front of cabinet behind
grille. (wink indicator for locating
& assigning)
Power LED (blue)
Signal LED (green)
Limit LED (red)
User DSP - defeat switch
Power switch
Fittings 2 x Recessed carrying handles
9 x M10 flying inserts
Dimensions 460mm x 694mm x 497mm
(18.11" x 27.32" x 19.57")
NET Weight
VQ NET 40DF 32kg
VQ NET 64DF 32.5kg
VQ NET 85DF 31kg
System VQ NET 40DF, VQ NET 64DF, VQ NET 85DF
Electronics
Efficiency >85% typically
Damping Factor 120 ref 8 Ohms
Distortion <0.05% @ 1kHz -3dB output
(22kHz bandwidth)
Input Impedance 5.6 kOhms unbalanced,
11.2 kOhms balanced
Output Power (Programme) 400W MF, 200W HF (limited to)
Input Sensitivity 1.4V (+5.5dBu)
System Type Dual channel Class D
DSP System
Comms Facilities Firmware updatable and selected
parameters editable
Communications Serial - RS485 Proprietary message format
Dynamic Range 112dB(A) typical
DSP 3rd generation SHARC
Sampling Frequency 96kHz 24 bit A/D-D/A word length
Format 1 IN - 2 OUT
PSU Specifications
Input Connector Locking Neutrik Powercon
Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
Type High current, high frequency switch mode
Efficiency >90% typical
Input voltage 100V / 115V / 230V nominal +/-10%
Mains fuse External
Fuse type T10AT
Other features Automatic soft start
Current Draw 115V 230V
Startup (inrush) 3.5A 1.9A
idle
1.0A 0.56A
Max 3.5A 1.7A
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber, then referred to 1 metre
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
TECHNICAL SPECIFICATIONS
PART NUMBER MODEL NAME COLOUR PACKED QUANTITY
8001 5800 VQ NET 40DF BLACK 1
8001 5801 VQ NET 40DF WHITE 1
8001 5810 VQ NET 64DF BLACK 1
8001 5811 VQ NET 64DF WHITE 1
8001 4861 VQ NET 85DF BLACK 1
8001 4861 VQ NET 85DF WHITE 1
Ordering Information
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
VQ Bookletv0909aw:Layout 1 4/9/09 11:23 Page 33