VQ - Brochure

VNET SC1 data file // issue 1.02 // 01.11.07
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Features common to both models:
• Two balanced XLR analogue inputs and six balanced
XLR analogue outputs
• Simple configuration and optimisation of loudspeakers
in terms of speaker management and room EQ functionality
• Intuitive signal flow based interface and 2 x 24 character
backlit LCD
• Unique routing engine allows any input to be sent to
any output.
• Butterworth, Bessel, Linkwitz Riley and Hardman type
filters are available on all outputs
• Input and output gain is adjustable in 0.2dB steps from
- 40dB to +15dB
• Input delay adjustable in variable steps from 0 to 400ms,
while output delay is adjustable to 80ms
• Automatically calculated attack and release constants
dependant on frequency
• RS232 connector enables connection to a laptop computer
or other PC for enhanced control functions using
VNET™ software
• Automatically adapting universal switch mode power
supply - 85 to 240 volts
Additional Feature - Network Enabled version only:
• Two XLR network link ports allow the network-enabled
version SC1 to combine any
VNET™ system with any other
loudspeaker system
•
Fixed Installations
• Touring Applications
Product Description
Features
Applications
In its basic configuration the Tannoy VNET SC1 is a powerful ‘2 in 6 out’ digital system
controller which provides multiple X-Over, EQ, Delay and Limiting options. Using DSP-based
digital crossovers with 96kHz sampling rates, this versatile controller will enable simple
configuration and optimisation of loudspeakers in terms of speaker management and room EQ
functionality.
Two versions of the VNET SC1 are available – one with a VNET™ network card and one
without. The ‘network enabled’ version facilitates VNET™ networking capability with two
network ports provided for connection to any Tannoy VNET™ system.
Equalisation is provided on each input and output section with two shelving filters and six fully
variable parametric sections. Butterworth, Bessel, Linkwitz Riley and Hardman filters are
available.
A high performance, low distortion limiter is incorporated on each output; threshold is user
adjustable with two LED’s provided for each output channel to indicate the signal level relative
to the limiter threshold.
Attack and release constants are automatically calculated by the VNET SC1 dependant on
frequency. Input and output gain is adjustable in 0.2dB steps from -40dB to +15dB. Input delay
is adjustable in variable steps from 0 to 400ms and output delay is adjustable to 80ms.
Set up of the unit is exceptionally simple thanks to the intuitive signal flow based interface, or it
can be controlled from a PC with Tannoy’s standard VNET™ software. Any of the inputs (A, B,
or sum) can be routed to any output with the unique routing engine of the VNET SC1.
The VNET SC1 can also be linked, via its RS232 connector, to a laptop computer or other PC
and controlled using VNET™ software. This will provide improved access to the configuration
functionality via simple on-screen graphics.
The universal switch mode power supply automatically adapts to mains voltages from
85 to 240 volts.
VNET SC1 Controller
VNET SC1 Controller (network enabled)
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
VNET SC1
VQ Bookletv0909aw:Layout 1 4/9/09 11:22 Page 24