VQ - Brochure

VQ MB data file // issue 1.08 // 30.07.09
VQ MB
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
TECHNICAL SPECIFICATIONS
System Type Mid Bass - Vented
Frequency Response (-3dB)
(1)
115Hz - 500Hz
Frequency Range (-10dB)
(1)
90Hz - 600Hz
System Sensitivity (1W @1m)
(2)
105dB (2.0V @ 4 Ohms)
Driver Complement 2 x 300mm (12.00”) Low
Frequency Transducers, Semi
Horn Loaded
Rated Maximum SPL
(2)
Average 135dB
Peak 141dB
Power Handling
(3)
Average 1000W (63.3V)
Programme 2000W
Recommended Amplifier Power 2000W into 4 Ohms
Nominal Impedance 4 Ohms (4.1 Ohms Minimum)
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre.
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber,
then referred to 1 metre
(3) Accelerated Life Test (EIA RS426-B)
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
System
PART NUMBER MODEL NAME COLOUR PACKED QUANTITY
8001 4810 VQ MB BLACK 1
8001 4811 VQ MB WHITE 1
Ordering Information
Enclosure 18mm (0.71") birch plywood
Vented and internally braced
Grille Powder coated perforated steel grille
Finish Black or white textured paint
(custom colours on request)
Connectors Barrier Strip & 1 x NL4
Fittings 2 x Recessed carrying handles
12 x M10 flying inserts
Dimensions 433mm x 694mm x 515mm
(17.05" x 27.32" x 20.28")
NET Weight 37.0kg (81.6 lbs)
Construction
VQ Bookletv0909aw:Layout 1 4/9/09 11:22 Page 19