VQ - Brochure

VQ DF
Tannoy adopts a policy of continuous improvement and product specification is subject to change
TECHNICAL SPECIFICATIONS
System Type 2-Way Mid/High - Point Source
Frequency Response (-3dB)
(1)
400Hz - 23kHz
Frequency Range (-10dB)
(1)
350Hz - 27kHz
System Sensitivity (1W @1m)
(2)
Single-Amp
VQ 40DF - Passive MF/HF (450Hz - 23kHz) 112dB (2.83V @ 8 Ohms)
VQ 64DF - Passive MF/HF (450Hz - 23kHz) 111dB (2.83V @ 8 Ohms)
VQ 85DF - Passive MF/HF (450Hz - 23kHz) 110dB (2.83V @ 8 Ohms)
Bi-Amp
VQ 40DF - MF (450Hz - 7kHz) 112dB (2.83V @ 8 Ohms)
VQ 40DF - HF (7kHz - 23kHz) 111dB (2.83V @ 8 Ohms)
VQ 64DF - MF (450Hz - 7kHz) 111dB (2.83V @ 8 Ohms)
VQ 64DF - HF (7kHz - 23kHz) 110dB (2.83V @ 8 Ohms)
VQ 85DF - MF (450Hz - 7kHz) 110dB (2.83V @ 8 Ohms)
VQ 85DF - HF (7kHz - 23kHz) 109dB (2.83V @ 8 Ohms)
Dispersion H x V (-6dB)
VQ 40DF 40 x 40 degrees
VQ 64DF 60 x 40 degrees
VQ 85DF 80 x 50 degrees
Driver Complement
MF/HF Dual Concentric™ Compression
driver loaded into a single
PSW™ Waveguide
Crossover
Single Amp 450Hz (Highpass) 7kHz (passive)
Bi Amp 450Hz (Highpass) 7kHz (active)
Directivity Factor (Q) 32.1(VQ 40DF), 23.5(VQ 64DF),
averaged 1kHz to 10kHz 12.4(VQ 85DF)
Directivity Index (DI) 15.1(VQ 40DF),13.7(VQ 64DF),
averaged 1kHz to 10kHz 10.9(VQ 85DF)
Rated Maximum SPL
(2)
Average Peak
VQ 40DF MF 135dB 141dB
VQ 40DF HF 131dB 137dB
VQ 40DF Passive MF/HF 135dB 141dB
VQ 64DF MF 134dB 140dB
VQ 64DF HF 130dB 136dB
VQ 64DF Passive MF/HF 134dB 140dB
VQ 85DF MF 133dB 139dB
VQ 85DF HF 129dB 135dB
VQ 85DF Passive MF/HF 133dB 139dB
Power Handling
(3)
Average Programme
MF @ 8 Ohms 200W (40V) 400W
HF @ 8 Ohms 90W (27V) 180W
Passive MF/HF @ 8 Ohms 200W (40V) 400W
Recommended Amplifier Power
Mid Frequency 400W into 8 Ohms
High Frequency 200W into 8 Ohms
Passive MF/HF 400W into 8 Ohms
Nominal Impedance
Mid Frequency 8 Ohms (7.0 Ohms Minimum)
High Frequency 8 Ohms (8.7 Ohms Minimum)
System VQ 40DF, VQ 64DF, VQ 85DF
PART NUMBER MODEL NAME COLOUR PACKED QUANTITY
8001 5780 VQ 40DF BLACK 1
8001 5781 VQ 40DF WHITE 1
8001 5790 VQ 64DF BLACK 1
8001 5791 VQ 64DF WHITE 1
8001 4830 VQ 85DF BLACK 1
8001 4831 VQ 85DF WHITE 1
Ordering Information
Enclosure 18mm (0.71") birch plywood.
Vented and internally braced.
Grille Powder coated perforated steel grille
Stainless steel on weatherproof version.
Finish Black or white textured paint
(custom colours on request)
Connectors Barrier Strip and Neutrik NL4
Fittings 2 x Recessed carrying handles
9 x M10 flying inserts
Dimensions 460mm x 694mm x 497mm
(18.11" x 27.32" x 19.57")
NET Weight
VQ 40DF TBC
VQ 64DF TBC
VQ 85DF 28kg
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber,
then referred to 1 metre
(3) Accelerated Life Test (EIA RS426-B)
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Construction
VQ DF data file // issue 1.06 // 30.07.09
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [e-mail]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [e-mail]
Tannoy France T: 00 33 (0) 1 7036 7473 E: [e-mail]
TC|Group Americas T: 00 1 [phone] E: [e-mail]
VQ Bookletv0909aw:Layout 1 4/9/09 11:22 Page 15