Operation Manual

GENERAL

Inputs 2

Input Impedance > 10k Ohm Electronically balanced

Maximum Input level +20dBu

Outputs 6

Output Impedance <100 Ohm, ground balanced

Maximum Output Level +20dBu into 600ohm load

Sample Rate 96kHz

Bit Depth 24 bit

Frequency Response 10Hz to 40kHz, +/- 3dB (filters disabled)

20Hz to 20kHz, +/- 0.5dB (filters disabled)

THD <0.01%, (+10dBu, 20Hz to 20kHz, 30kHz bandwidth)

Dynamic Range >112dB (A weighted, 22kHz bandwidth)

>109dB (un-weighted, 22kHz bandwidth)

Serial Comms Data 38.4kbaud, format: 8 data, 1 stop, no parity

PROCESSING

Gain +15dB to -40dB and mute, 0.2dB steps

Output Ch. Source Input A, Input B and SUM

HP filter frequency Off, 10Hz to 25.4kHz, 1/36 octave steps

LP filter frequency 10Hz to 25.4kHz and off, 1/36 octave steps

LP / HP filter type 12, 18 & 24dB/octave Bessel and Butterworth

12, 24 and 48dB/octave Linkwitz Riley

4th or 8th order Hardman

Delay Input 400ms, output 80ms

Limiter High performance limiter, adjustable threshold in 0.2dB steps,

automatic time constants

EQ frequency 10Hz to 25kHz, 1/36 octave steps

EQ gain +15dB to -15dB, 0.2dB steps

EQ width 5.0 to 0.1 octaves bandwidth, 1/36 octave steps

CONNECTORS

Audio inputs 3 pin female XLR

Audio outputs 3 pin male XLR

Serial comms Available via RS232 port

Network comms Only available on network enabled SC1

Mains 3 pin IEC

Mains Power Universal switch-mode PSU, 85v to 250v AC, 50 / 60Hz

Consumption < 25watts

Dimensions 44mm (H), 482mm (W), 254mm (D)

Weight 2.7 Kgs net

TECHNICAL SPECIFICATIONS

SYSTEM VNET

SC1