Operation Manual

DEVICE PROPERTIES

At the top of the panel there are several pieces of information about the connected device (which are only activated when

going On-line to a device):

Model Name

The model number (SC-1)

Device name

To uniquely identify the device (i.e. delay 3). This is set by the user.

Also see (Controls and Control Panels)

KEYBOARD SHORTCUTS

PodWare supports the following ‘shortcuts’:

Tab Move to next control

In value boxes:

CTL+C Copy

CTL+V Paste

CTL+X Cut

CTL+Z Undo

On Drop-down, Spin, Push, Fader controls:

PgUp Increase value (coarsely)

PgDown Reduce value (coarsely)

Up/Right arrow Increase value (finely)

Down/Left arrow Reduce value (finely)

On push-button controls:

Space Activate

AUDIO PROCESSING

SC1 provides the following processing options:

Crossover filtering with frequency variable over the range 10Hz to 25kHz (and ‘Out’) with the following alignments:

1st order

12dB/Octave Bessel

12dB/Octave Butterworth

12dB/Octave Linkwitz-Riley

18dB/Octave Bessel

18dB/Octave Butterworth

24dB/Octave Bessel

24dB/Octave Butterworth

24dB/Octave Linkwitz-Riley

4th Hardman

48dB Butterworth

48dB Linkwitz-Riley

8th Hardman