Operation Manual

UTILITIES

Three utility functions are provided to adjust screen contrast, the display units used for parametric equalisation bandwidth

and switch between stereo and mono mode.

The device automatically adjusts for the variations in display contrast as the temperature of the LCD changes. The screen

contrast utility control sets the base contrast of the screen and also allows optimization for a given viewing angle.

Parametric equalisation width parameters can be displayed in either ‘Q’ or bandwidth, expressed in octaves.

Care should be taken when swapping between mono and stereo mode as the parameter set for the left hand channels will be

copied to the right hand side, overwriting those settings. This is not reversible and could represent quite a significant and

potentially damaging change to the processing.

Util Screen ParaEQ

1.. 100% BW=Q

Util Mode

..2 Mono