Quick Start Guide

16 QFLEX WP Series Quick Start Guide 17
Other important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting tannoy. com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and e ciently. Also, read the terms and
conditions of our warranty, ifapplicable.
2. Malfunction. Should your MUSICGroup
Authorized Reseller not be located in your vicinity,
youmay contact the MUSICGroup Authorized Ful ller
for your country listed under “Support” at tannoy. com.
Shouldyour country not be listed, please check if your
problem can be dealt with by our “OnlineSupport” which
may also be found under “Support” at tannoy. com.
Alternatively, please submit an online warranty claim at
tannoy. com BEFORE returning theproduct.
3. Power Connections. Beforeplugging the
unit into a power socket, pleasemake sure you are using
the correct mains voltage for your particular model.
Faultyfuses must be replaced with fuses of the same
typeand rating withoutexception.
Important information
Technical Speci cations
* Note: The maximum power requirements for QFlex models are 1000 W
QFlex 64-WP QFlex 48-WP QFlex 40-WP
Con guration
4" LF 32 16 8
3" LF 16 16 16
1" HF 16 16 16
No. of amp channels 100 W (RMS) @ 4 Ohms 64 48 40
Vertical dispersion
5 - 100 degrees symmetrical or asymetrical,
single or multiple beams
Variable between 10 - 100 degrees (asymetrical & multiple beams may also be generated)
Frequency range 110 Hz – 20 kHz 110 Hz - 20 kHz 110 Hz - 20 kHz
Horizontal dispersion 120 degrees 120 degrees 120 degrees
Aiming angle limit -- +/- 70 degrees +/- 70 degrees
LF beam control limit 110 Hz 200 Hz 250 Hz
Maximum SPL @ 100 ft (30 m)* 103 dB 101.5 dB 100 dB
Column height 5488 mm (216") 2967 mm (116.8") 2127 mm (83.8")
Column width 172 mm (6.7") 172 mm (6.7") 172 mm (6.7")
Column depth 150 mm (5.9") 150 mm (5.9") 150 mm (5.9")
Typical application distance** Up to 100 m (328 ft) 80 m (263 ft) 70 m (231 ft)
Sample rate 96 kHz
Audio inputs Analogue & AES/EBU
Weight (incl. hardware) 89.3 kg (196.5 lbs) 49.7 kg (109.3 lbs) 37.2 kg (81.8 lbs)
Accessories
VNET USB Interface,VNET Ethernet Interface,VNET2-Dante Bridge,VNET Interface Power Supply,
Sentinel SM1 System Monitor,AES Break-in box, QFlex Isolator
Mains supply 100 - 240 V~ 50/60 Hz
Power consumption 780w @ ⁄ max power 540w @ ⁄ max power 420w @ ⁄ max power
QFlex 32-WP QFlex 32LS-WP QFlex 24-WP QFlex 16-WP
Con guration
4" LF - 16 8 -
3" LF 16 8 8 8
1" HF 16 8 8 8
No. of amp channels 100 W (RMS) @ 4 Ohms 32 32 24 16
Vertical dispersion Variable between 10 - 100
degrees (asymetrical & multiple
beams may also be generated)
5 - 100 degrees symmetrical
or asymetrical, single or
multiple beams
Variable between 10 - 100 degrees (asymetrical & multiple beams
may also be generated)
Frequency range 130 Hz - 20 kHz 110 Hz - 20 kHz 110 Hz - 20 kHz 130 Hz - 20 kHz
Horizontal dispersion 120 degrees 120 degrees 120 degrees 120 degrees
Aiming angle limit +/- 70 degrees +/- 70 degrees +/- 70 degrees +/- 70 degrees
LF beam control limit 400 Hz 200 Hz 400 Hz 700 Hz
Maximum SPL @ 100 ft (30 m)* 100 dB 100 dB 96 dB 94 dB
Column height 1387 mm (54.6") 3163 mm (124.5") 1483 mm (58.4") 743 mm (29.3")
Column width 172 mm (6.7") 172 mm (6.7") 172 mm (6.7") 172 mm (6.7")
Column depth 150 mm (5.9") 150 mm (5.9") 150 mm (5.9") 150 mm (5.9")
Typical application distance** 50 m (165 ft) Up to 65m (213 ft) 40 m (131 ft) 25 m (82 ft)
Sample rate 96 kHz
Audio inputs Analogue & AES/EBU
Weight (incl. hardware) 24.0 kg (52.8 lbs) 46.4 kg (102.1 lbs) 25.4 kg (55.9 lbs) 13.3 kg (29.3 lbs)
Accessories VNET USB Interface,VNET Ethernet Interface, VNET2-Dante Bridge,VNET Interface Power Supply,
Sentinel SM1 System Monitor, AES Break-in box, QFlex Isolator
Mains supply 100 - 240 V~ 50/60 Hz 100 - 240 V~ 50/60 Hz
Power consumption 300w @ ⁄ max power 390w @ ⁄ max power 270w @ ⁄ max power 150w @ ⁄ max power