Quick Start Guide
70 QFLEX 16LS-WP Quick Start Guide 71
* Note: The maximum power requirements for QFlex models are 1000 W
QFlex 16LS-WP
Conguration
4" LF 16
No. of amp channels 100 W (RMS) @ 4 Ohms 16
Vertical dispersion 5 - 100 degrees symmetrical or asymetrical,
single or multiple beams
Frequency range 150 Hz - 15 kHz
Horizontal dispersion 120 degrees
Aiming angle limit +/- 40 degrees
LF beam control limit 230 Hz
Maximum SPL @ 100 ft (30 m)* 99 dB
Column height 2525.2 mm (99.4")
Column width 179.5 mm (7.0")
Column depth 214.6 mm (8.5")
Typical application distance** Up to 64m (164 ft)
Sample rate 96 kHz
Audio inputs Analogue & AES/EBU
Weight (incl. hardware) 37.4 kg (82.5 lbs)
Accessories VNET USB Interface, VNET Ethernet Interface,
VNET2-Dante Bridge, VNET Interface Power Supply,
Sentinel SM1 System Monitor,
AES Break-in box, QFlex Isolator
Mains supply 100 - 240 V~ 50/60 Hz
Power consumption 140 W @ ⁄ max power
Specications