Quick Start Guide PCI In-Wall Subwoofer PCI SUB IW Premium Dual 8" In-Wall Subwoofer for Installation Applications BACK CAN PCI SUB IW Back Can Kit for PCI SUB IW In-Wall Speakers
PCI SUB IW Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 PCI SUB IW Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 PCI SUB IW Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 PCI SUB IW 其他的重要信息 Quick Start Guide 11. ឱԷΏၺԉࠓࠁᄋᬅ֘ܭ ᦢ͉ǎ 12.
10 PCI SUB IW Quick Start Guide Product Feature Identification Grille Installed Product Feature Identification Installation Template Subwoofer and Frame Assembly Screw terminals for speaker wires Back Can Assembly Paint Mask Wood Construction Subwoofer Assembly Frame Assembly Aperture Screws (hex X6) for mounting speaker assembly into frame Screws (crosshead X6) for extending the mounting clamps Mounting Clamps (x6) Cable Entry for Speaker Wire Adjustable Mounting Brackets (X4) 11
12 PCI SUB IW Quick Start Guide Installation Guide Back Can Installation WARNING: This procedure requires the use of an assistant, and the use of personal protection equipment, such as safety glasses and gloves. 6. Install the speaker wire in through the cable gland, and leave enough slack to make the connections to the subwoofer assembly when that time comes (Fig. 3). Tighten the cable gland, and tie down the speaker cable to prevent it moving and rattling in operation.
14 PCI SUB IW Quick Start Guide 15 Alternative Installation without the Back Can Subwoofer Frame Installation If you are not using the PCI SUB back can, then use the supplied template as a guide to cutting the sheetrock. WARNING: This procedure requires the use of personal protection equipment, such as safety glasses and gloves. With the back can installed and the sheetrock cut as shown in the previous instructions, the speaker frame can be fitted into position.
16 PCI SUB IW Quick Start Guide Wall Clamp Mechanism Subwoofer Installation into the Frame The clamping mechanism has been designed to provide an acoustically-optimum bond to the wall surface without risk of distortion to the loudspeaker baffle. With the subwoofer frame installed and the wall and frame finished and painted, the subwoofer assembly can now be wired and installed into the frame.
PCI SUB IW Quick Start Guide Dimensions Dimensions 10,4 mm [0.41"] 108,90 mm [4.29"] 86,0 mm [3.39"] 71,0 mm [2.80"] 251,9 mm [9.92"] 275,4 mm [10.84"] 264,5 mm [10.41"] 603,5mm [23.76"] 345,0 mm [13.58"] 495,6 mm [19.51"] 98,0 mm [3.86"] 1405,0 mm [55.32"] 1465,0 mm [57.68"] 482,8 mm [19.01"] 252,5mm [9.94"] 81,7 mm [3.22"] 93,7 mm [3.69"] WALL BOARD FACE 482,5 mm [19.00"] 18 ** WALL BOARD THICKNESS ESTIMATION (12 mm, 0.47") 563,5 mm [22.
20 PCI SUB IW Quick Start Guide Other important information Specifications Performance Frequency response (±3 dB) Frequency response (-10 dB) Sensitivity (1 W @ 1m) 100 Hz – 2 kHz 45 Hz – 2.
22 PCI SUB IW Quick Start Guide 23