Quick Start Guide

8. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the speaker
terminals on the speaker frame. Make sure to check that the polarity is correct and that the positive and negative
wires are securely and correctly connected. Secure the speaker wiring to the rear ring of the frame with tie-wraps to
prevent movement.
9. Carefully press the speaker frame into the cutout hole, making sure the speaker wires are not pinched. Reach
inside the frame and rotate the clamps outwards and pull the clamps forward on their rails to secure the speaker
frame to the drywall/plasterboard. To remove the speaker frame from the hole, press the release tabs and push
the clamps back.
PCI 8DC Terminals
Clamps (X4)
Clamp
Rail
Release
10. Use the supplied square or circular masks to help protect the speaker cones when painting.
11. The grilles can be painted separately.
12. To mount the speaker into the mounted speaker frame, align the connecter on the speaker, with the
corresponding connector on the speaker frame.
Painting Masks in Place
Alignment guide
33Quick Start Guide
32 QCI 3/QCI 8DC/PCI 8DC32