Quick Start Guide

18 PCI 7DC IW and Back Can Quick Start Guide 19
Other important information
1. Register online. Please register your new
Music Tribe equipment right after you purchase it by
visiting tannoy.com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and e ciently. Also, read the terms and
conditions
of our warranty, if applicable.
2. Malfunction. Should your Music Tribe
Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Ful ller for
your country listed under “Support” at tannoy.com. Should
your country not be listed, please
check if your problem
can be dealt with by our “Online Support” which may also
be found under “Support” at tannoy.com. Alternatively,
please submit an online warranty claim at behringer.com
BEFORE returning the product.
3. Power Connections. Before plugging the
unit
into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.
Important information
Speci cations
P0DHC PCI 7DC IW
Performance
Frequency response (±3 dB) 50 Hz – 20 kHz
Frequency response (-10 dB) 30 Hz – 20 kHz
Sensitivity (1 W @ 1m) 86 dB
Directivity factor (Q) 4.4 averaged 1 kHz to 10 kHz
Directivity index (DI)6.4 averaged 1 kHz to 10 kHz
Power handling (IEC)
Average 80 W
Programme 160 W
Peak 320 W
Recommended ampli er power 240 W @ 8 Ω
Nominal Impedance (Lo Z) 8 Ω
Rated maximum SPL (1 m, Lo Z) 108 dB
Average 105 dB
Peak 111 dB
Crossover point 1.6 kHz
Coverage angles
500 Hz180° horizontal, 152° vertical
1 kHz132° horizontal, 136° vertical
2 kHz118° horizontal, 130° vertical
4 kHz113° horizontal, 112° vertical
Transducers
Low frequency diameter/material/type 201 mm (7")
High frequency diameter/material/type 25.4 mm (1")
Physic al
Back can Wood, with spray painting
Ba eRe ex loaded UL94 V-0 rated ABS
GrilleSteel, with weather resistant coating
Safety features —
Clamping design —
Connectors Replacement Plug Housing
Dimensions (HxWxD) 1202 x 347 x 128 mm (47.3 x 13.7 x 5.0")
Bezel dimensions 410 x 248 mm( 16.1 x 9.8")
Mounting
depth 101 mm (4.0")
Hole cutout dimensions 395 x 231 mm (15.6 x 9.1")
Net weight 13.5 kg (29.8 lbs)
Packed quantity 1
Included accessories Grille, paint mask, tool kit, screws (x 4),
spring washers (x 4), plain washer (x 4)
Optional accessories BACK CAN PCI 7DC IW