Product Information Document

Product Information Document
8 of 13
Technical Specications
Performance
Frequency response (-3 dB)
1
75 Hz - 20 kHz
Frequency response (-10 dB)
1
60 Hz - 30 kHz
System sensitivity (1 W @ 1 m)
2
90 dB
Dispersion (-6 dB) 80 degrees conical
Transducers Coaxial
Low frequency 200 mm (8.00") mineral
loaded cone material
High frequency 20 mm (0.79)
Crossover 3.4 kHz - 2nd order LF, 2nd order HF
Directivity (Q) 12.3 averaged 1 kHz to 10 kHz
Directivity (DI) 10.0 averaged 1 kHz to 10 kHz
Rated maximum SPL
2
108 dB (average)
114 dB (peak)
Non Transformer Version
Maximum wire 2.5 mm CSA (AWG12)
gauge for connector
Safety Agency Ratings UL-1480, CE
Power Handling
Average 70 W
Programme 140 W
Peak 280 W
Recommended amplifier power 140 W @ 6 Ohms
Nominal impedance 6 Ohms
Construction
Enclosure ABS
Grille Aluminium, painted
Connectors Euroblock type removable locking
connector with screw terminals with
“loop through” facility
Supplied accessories Yoke bracket
Packed quantity 2
Dimensions (H x W x D) 451.8 x 290.0 x 296.0 mm
(17.79 x 11.42 x 11.65")
Non-transformer versions
Net weight 5.7 kg (12.6 lbs)
Shipped weight 14.5 kg (32 lbs)
Transformer versions
Net weight 7 kg (15.4 lbs)
Shipped weight 17.1 kg (37.7 lbs)
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, and Ease Data can be downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal
or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when
dealing with critical applications.
8" Coaxial Surface-Mount Loudspeaker for
Installation Applications (White)
Install
DVS 8-WH