Quick Start Guide

4 CMS 801 Series
快速启动向导
5
产品特征识别
图 1.1: 盲装 (BM) 型号带有预装后背罐
图 1.2: 显示的预安装 (PI) 型号不带可选的预安装后盖
图 1.3: 用于 PI 型号的可选预安装 (PI) 背罐
请注意, CMS 801 PI 型号的变压器预先连接到 CMS 801 PI 后盖, 以便于安装。
Screws for
mounting wings
Rotary Switch
Tuning Port
Euro Type Connector
Euro Type Connector
Conduit Knock-out points
Euro Type Plug
Euro Type Connector
配件
每个产品都标配以下附件:
可选配件:
C-Ring
Tile bridge kit
Note: A tile bridge kit
must always be used
when installing into
suspended ceiling tiles
Grille
Cut-out template
Paint Mask
Plaster (Mud)
Ring
60 W Transformer
NOTE: for use with CMS801 PI
model in distributed lines without
back-cans.