Product Information Document

Product Information Document
5 of 11
Technical Specications
System
Frequency response (-3 dB)
(1)
58 Hz - 160 Hz
Frequency range (-10 dB)
(1)
42 Hz - 300 Hz
System sensitivity (1 W @ 1 m)
(2)
92 dB (1 W = 2.45 V for 8 Ohms)
Rated maximum SPL
(2)
112 dB (average) 118 dB (peak)
With THP60 110 dB (average)
Power handling (3)
Average 100 W
Programme 200 W
Peak 400 W
Recommended amplier power 200 W @ 8 Ohms
Nominal impedance 8 Ohms
Transformer taps (via front rotary switch)
70 V 60 W/30 W/15 W/7.5 W/OFF &
Low impedance operation
100 V 80 W/30 W/15 W/OFF &
Low impedance operation
Crossover Integral 2nd order passive, 160 Hz
Transducers
Low frequency 1x 200 mm (8.00") long throw woofer with
High frequency multi fibre paper pulp cone
Enclosure
Back can Zinc plated steel
Bae Reex loaded UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bondClamping
Design Security toggle clamp
Transducers
Backcan Options
Pre Install (PI) Separate back can for pre installation
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions
19 / 22 / 28 mm (0.75 / 0.87 / 1.1")
Connectors Removable locking connector with
screw terminals with “loop
through” facility
Safety agency ratings (pending) UL-1480, UL-2043, CE
PI hole cutout diameter 295 mm (11.61")
8" Compact Ceiling Mounted Subwoofer for
Installation Applications (Pre-Install)
Install
CMS 801 SUB PI