Quick Start Guide

16 PCI 7DC RB Quick Start Guide 17
Other important information
1. Register online. Please register your new
Music Tribe equipment right after you purchase it by
visiting tannoy.com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and e ciently. Also, read the terms and
conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe
Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Ful ller for
your country listed under “Support” at tannoy.com. Should
your country not be listed, please check if your problem
can be dealt with by our “Online Support” which may also
be found under “Support” at tannoy.com. Alternatively,
please submit an online warranty claim at behringer.com
BEFORE returning the product.
3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.
Important information
Technical Speci cations
PCI 7DC RB
Performance
Frequency response (±3 dB) 60 Hz – 20 kHz
Frequency response (-10 dB) 40 Hz – 20 kHz
Sensitivity (1 W @ 1m) 91 dB
Directivity factor (Q) 5.7 averaged 1 kHz to 10 kHz
Directivity index (DI) 7.6 averaged 1 kHz to 10 kHz
Power handling (IEC)
Average 80 W
Programme 160 W
Peak 320 W
Recommended ampli er power 240 W @ 8 Ω
Nominal Impedance (Lo Z) 8 Ω
Rated maximum SPL (1 m, Lo Z)
Average 110 dB
Peak 116 dB
Transformer taps NA
Crossover point 1.6 kHz
Coverage angles
500 Hz 173° horizontal, 136° vertical
1 kHz 188° horizontal, 153° vertical
2 kHz 130° horizontal, 169° vertical
4 kHz 86° horizontal, 96° vertical
Transducers
Low frequency diameter/material/type 201 mm (7")
High frequency diameter/material/type 25.4 mm (1")
Physical
Enclosure
Back can Wood, with spray painting
Ba e Re ex loaded UL94 V-0 rated ABS
Grille Steel, with weather resistant coating
Safety features N/A
Clamping design N/A
Connectors Replacement Plug Housing
Dimensions (HxWxD) 350 x 350 x 160 mm (13.8 x 13.8 x 6.3")
Bezel dimensions 350x350 mm (13.8"x13.8")
Mounting depth 152 mm (6.0")
Hole cutout dimensions 332 x 332 mm (13.1"x13.1")
Net weight 3.8 kg (8.4 lbs)
Packed quantity 1
Included accessories Grille, paint mask, tool kit, washers (x 2)
screws (x 2), plain washer (x 2)
Back can dimensions (H x W x D) 353 x 700 x 190 mm (13.9 x 13.1 x 7.5")