Product Information Document

Product Information Document
9 of 14
Technical Specications
Performance
Frequency response (-3 dB)
(1)
65 Hz - 30 kHz
Frequency range (-10 dB)
(1)
53 Hz - 40 kHz
System sensitivity (1 W @ 1m)
(2)
92 dB (1 W = 4 V for 16 Ω)
Nominal Coverage Angle 90 degrees conical
Power Handling
(3)
Average 90 W
Programme 180 W
Peak 360 W
Recommended Amplifier Power 180 W @ 16 Ω
Nominal Impedance (Lo, Z) 16 Ω
Rated maximum SPL
Average 111 dB
Peak 117 dB
Transformer Taps (via front rotary switch)
70 V 60 W / 30 W / 15 W / 7.5 W /
OFF & Low impedance operation
100 V 60 W / 30 W / 15 W /
OFF & Low impedance operation
Transducers
Dual Concentric point source driver 1x 200 mm (8") Dual Concentric driver,
using Omnimagnet technology
Low Frequency 44 mm (1.75" ) voice coil,
treated multi bre paper pulp cone
High Frequency 25 mm (1") PEI dome
Physical
Enclosure ABS
Grille Steel, plated and painted
Connectors Removable locking connector
with screw terminals
Transformer setting Rotary switch
Dimensions (H x W x D) 409.8 x 260.0 x 306.3 mm
(16.13 x 10.24 x 12.06")
Net Weight (ea) 7.8 kg (17.20 lbs)
Shipped weight 8.8 kg (19.40 lbs)
Included Accessories Yoke bracket
Packed Quantity 2
Notes:
1. Average over stated bandwidth. Measured in an IEC bae in an Anechoic Chamber
2. Unweighted pink noise input, measured at 1 metre on axis
3. Long term power handling capacity as dened in EIA - 426B test
A full range of measurements, performance data, CLF and Ease Data for AMS 8DC can be downloaded from www.tannoypro.com.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will
always equal or exceed the publishing specications, which Tannoy reserves the right to alter without prior notice. Please verify the
latest specications when dealing with critical applications.
8" Dual Concentric Surface-Mount
Loudspeaker for Installation Applications
Install
AMS 8DC