Product Information Document

Product Information Document
9 of 14
Technical Specications
Performance
Frequency response (-3 dB)
(1)
75 Hz - 30 kHz
Frequency range (-10 dB)
(1)
55 Hz - 40 kHz
System sensitivity (1 W @ 1m)
(2)
89 dB (1 W = 4 V for 16 Ω)
Nominal Coverage Angle 90 degrees conical
Power Handling
(3)
Average 80 W
Programme 160 W
Peak 320 W
Recommended Amplifier Power 160 W @ 16 Ω
Nominal Impedance (Lo, Z) 16 Ω
Rated maximum SPL
Average 108 dB
Peak 114 dB
Transformer Taps (via front rotary switch)
70 V 60 W / 30 W / 15 W / 7.5 W /
OFF & Low impedance operation
100 V 60 W / 30 W / 15 W /
OFF & Low impedance operation
Tr an sducers
Dual Concentric point source driver 1x 165 mm (6.50") Dual Concentric driver,
using Omnimagnet technology
Low Frequency 44 mm (1.75" ) voice coil,
treated multi bre paper pulp cone
High Frequency 25 mm (1") PEI dome
Physical
Enclosure ABS
Grille Steel, plated and painted
Connectors Removable locking connector
with screw terminals
Transformer setting Rotary switch
Dimensions (H x W x D) 364.8 x 230.0 x 268.8 mm
(14.36 x 9.05 x 10.58")
Net Weight (ea) 6.25 kg (13.78 lbs)
Shipped weight 7.1 kg (15.6 lbs)
Included Accessories Yoke bracket
Packed Quantity 2
Notes:
1. Average over stated bandwidth. Measured in an IEC bae in an Anechoic Chamber
2. Unweighted pink noise input, measured at 1 metre on axis
3. Long term power handling capacity as dened in EIA - 426B test
A full range of measurements, performance data, CLF and Ease Data for AMS 6DC can be downloaded from www.tannoypro.com.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will
always equal or exceed the publishing specications, which Tannoy reserves the right to alter without prior notice. Please verify the
latest specications when dealing with critical applications.
Copyright (c) 2015 Tannoy Limited. All rights reserved
6" Dual Concentric Surface-Mount Loudspeaker
for Installation Applications (White)
Install
AMS 6DC-WH