Data Sheet
Technical Data Sheet - Revision 02 - 03/2019 EN - 3 Page(s) Page 2
Cleaner
Open the bottle by pushing the safety lock while at the same time turning the cap (child-
resistant push-and-turn closure). The application is done with fluff-free, white, non-
dyed tissue paper.
Tissues
Before use take the bag out of the box and cut the foil on top. Pull one tissue from
middle of the tissue roll and pass through the crossed slot of the top cover.
Application/Cleaning
Thoroughly clean the plastic parts to be welded with Tangit KS Cleaner and use a new
tissue for each cleaning operation. Immediately before welding, wipe the parts to be
joined dry with clean and fluff free tissue paper. After each welding operation, the
welding tools must be cleaned with a clean and dry cloth.
Only clean the welding tools with Tangit KS Cleaner after they have properly
cooled.
TECHNICAL DATA
Composition Ethanolmin.99,8%denaturated
Density 0.79g/cm
3
Consumption Seetablebelow
ShelfLife 36months
Tissues 100Tissues
Consumption
For the production of one welded joint the following approximate amounts of cleaner
or tissues are required:
Pipe
dimensions:
- d
(
mm
)
32
40
50
63
75
90
110
140
160
225
280
315
Tangit KS
Cleaner
(
g)
4
6
8
10
12
13
16
20
25
45
65
100
Pipe
dimensions:
- d
(
mm
)
32 -63
75 - 110
140 - 225
280
–
315
approx.
Tissues
2
4
6
8
Please note: The consumption statements indicated above are maximum values based on laboratory experience.
The actual consumption in a given application depends on working method and temperature.