Certifications 2

SDS No.: 41928 V002.0
Tangit KS Cleaner Tissues
Page 5 of 11
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Suitable breathing mask when there is inadequate ventilation.
Combination filter: ABEKP (EN 14387)
This recommendation should be matched to local conditions.
Hand protection:
In the case of longer contact protective gloves made from nitrile rubber are recommended according to EN 374.
Perforation time > 10 minutes
material thickness > 0.1 mm
In the case of longer and repeated contact please note that in practice the penetration times may be considerably shorter than
those determined according to EN 374. The protective gloves must always be checked for their suitability for use at the specific
workplace (e.g. mechanical and thermal stress, product compatibility, antistatic effects, etc.). The gloves must be replaced
immediately at the first signs of wear and tear. The information provided by the manufacturers and given in the relevant trade
association regulations for industrial safety must always be observed. We recommend that a hand care plan is drawn up in
cooperation with a glove manufacturer and the trade association in accordance with the local operating conditions.
Eye protection:
Goggles which can be tightly sealed.
Protective eye equipment should conform to EN166.
Skin protection:
Suitable protective clothing
Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Advices to personal protection equipment:
The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be
conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions.
Personal protective equipment should conform to the relevant EN standard.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
nonwoven fabric
thin
white
Odor
alcohol-like
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Melting point
No data available / Not applicable
Solidification temperature
No data available / Not applicable
Initial boiling point
78,0 °C (172.4 °F)
Flash point
12 °C (53.6 °F); no method
Evaporation rate
No data available / Not applicable
Flammability
No data available / Not applicable
Explosive limits
lower
upper
1,5 %(V)
15 %(V)
Vapour pressure
No data available / Not applicable
Relative vapour density:
No data available / Not applicable
Density
No data available / Not applicable
Bulk density
No data available / Not applicable
Solubility
No data available / Not applicable
Solubility (qualitative)
(20 °C (68 °F); Solvent: Water)
Partially miscible
Partition coefficient: n-octanol/water
No data available / Not applicable
Auto-ignition temperature
No data available / Not applicable
Decomposition temperature
No data available / Not applicable
Viscosity
No data available / Not applicable
Viscosity (kinematic)
No data available / Not applicable