Certifications 2

SDS No.: 41955 V001.11
Tangit Cleaner PVC-U/C ABS
Page 8 of 14
Skin protection:
Suitable protective clothing
Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Advices to personal protection equipment:
The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be
conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions.
Personal protective equipment should conform to the relevant EN standard.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
liquid
low viscosity
colourless, clear
Odor
of methyl ethyl
ketone
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Melting point
No data available / Not applicable
Solidification temperature
No data available / Not applicable
Initial boiling point
56 °C (132.8 °F)
Flash point
-16 °C (3.2 °F); no method
Evaporation rate
No data available / Not applicable
Flammability
No data available / Not applicable
Explosive limits
lower
upper
1,5 %(V)
14,3 %(V)
Vapour pressure
No data available / Not applicable
Relative vapour density:
No data available / Not applicable
Density
(20 °C (68 °F))
0,792 - 0,802 g/cm3
Bulk density
No data available / Not applicable
Solubility
No data available / Not applicable
Solubility (qualitative)
(20 °C (68 °F); Solvent: Water)
Miscible
Partition coefficient: n-octanol/water
No data available / Not applicable
Auto-ignition temperature
No data available / Not applicable
Decomposition temperature
No data available / Not applicable
Viscosity
No data available / Not applicable
Viscosity (kinematic)
No data available / Not applicable
Explosive properties
No data available / Not applicable
Oxidising properties
No data available / Not applicable
9.2. Other information
No data available / Not applicable
SECTION 10: Stability and reactivity
10.1. Reactivity
None if used for intended purpose.
10.2. Chemical stability
Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
See section reactivity
10.4. Conditions to avoid
None if used for intended purpose.